DC06 cold-rolled steel sheet
DC06 cold-rolled steel sheet is mainly used for special deep drawing and shaping process.
- DC06 cold-rolled steel sheet mechanical properties:
|
Grade |
MPa |
MPa |
Elongation % A80mm not less than |
r90° |
n90° |
||||||
|
mm nominal thickness |
|||||||||||
|
<0.30 |
0.30~<0.50 |
0.50~<0.70 |
0.70~<1.0 |
1.0~<1.6 |
≧1.6 |
Not less than |
|||||
|
DC06 |
110~170 |
260 |
_ |
37 |
39 |
41 |
42 |
43 |
2.1 |
0.22 |
|
a. when there is no significant yield, RP0.2 should be used; otherwise ReL should be used. When the thickness is more than 0.50mm and not more than 0.70mm, the specified value of the yield strength is allowed to increase 20MPa; when the thickness is not more than 0.50mm, the specified value of the yield strength is allowed to increase 40MPa.
b. The sample is the P6 sample in GB/T 228 and the sample direction is transverse.
c. The requirement of r90 and n90 values apply only to products with the thickness not less than 0.50mm. When the the thickness is more than 2.00mm, the value of r90 is allowed to lower 0.2.
Popular specifications are in short supply!
click to get the specification sheet!
- Available range of DC06 cold-rolled steel sheet for appliances:
|
|
Nominal size |
|
|
Thickness |
0.25-3.5 |
|
|
Width |
800-1830 |
|
|
Length |
Steel plate |
1000-6000 |
|
Steel strip |
Coil inside diameter 508,610 |
|
GNEE's Services
Purchasing Gnee Steel galvanized steel products can provide the following deep processing services. We can customize according to the specific needs of customers to meet the requirements.
Precision Cutting Service: Galvanized steel products can be custom cut to obtain the desired shape and size according to the needs of customers. For example, flame cutting, plasma cutting, laser cutting, etc., can cut galvanized steel sheet/coil/tube into required blocks, special-shaped parts.
Bending and forming: Galvanized steel products are bent and formed by stress application and appropriate processes to obtain the desired shape.
Welding service: Welding services for joining multiple pieces of galvanized steel, creating complex structures.
Punching and Perforation: Punching or perforating services for creating holes, slots, or other patterns in the galvanized steel. Meet specific assembly requirements.
Surface treatment: Additional coating or finishing processes to enhance the aesthetics or performance of the galvanized steel.
