Project Background
A steel importer in Bangladesh placed a consolidated order with GNEE STEEL for 786.30 metric tons of hot-dip galvanized steel coil, to be produced and shipped as one contract to Chittagong. The importer supplies formers and fabricators across the country's construction and light-engineering sector, and buys in full production runs rather than spot lots.



Customer Requirements
|
Requirement |
Detail |
|
Product |
|
|
Steel grade |
DX51D base metal, referenced against ASTM A653/A653M SS Grade 50 (340) Class 1 |
|
Thickness |
1.5 mm, 1.8 mm, 2.0 mm, 2.5 mm |
|
Slit width |
700 mm and 870 mm |
|
Coating |
Z275 minimum (275 g/m² across both faces) |
|
Total quantity |
786.30 MT |
|
Trade term |
CFR Chittagong |
|
Payment |
Irrevocable letter of credit at sight |
|
Packing |
Export sea packing, break-bulk stowage |
|
Documents |
Bill of lading, invoice, packing list, mill test certificates, certificate of origin |
The buyer's stated reason for the Z275 minimum was the local service environment: a monsoon season and salt-bearing air along the Chittagong corridor shorten the life of lightly coated material, and a coating that fails early becomes the importer's liability in resale.


Specifications Delivered
|
Item |
Grade |
Thickness |
Width |
Coating |
Quantity (MT) |
|
1 |
1.5 mm |
700 mm |
Z275 |
224.930 |
|
|
2 |
DX51D |
1.8 mm |
700 mm |
Z275 |
126.585 |
|
3 |
DX51D |
2.0 mm |
700 mm |
Z275 |
97.850 |
|
4 |
DX51D |
2.5 mm |
700 mm |
Z275 |
91.560 |
|
5 |
DX51D |
2.0 mm |
870 mm |
Z275 |
121.780 |
|
6 |
DX51D |
2.5 mm |
870 mm |
Z275 |
123.595 |
|
Total |
786.300 |
Our Solution
Six specifications scheduled as one production run, so all six items carried the same coating specification and the same release standard rather than being produced to different regimes at different times.
DX51D base metal with Z275 coating, with mechanical properties verified against the structural requirement the buyer referenced and a mill test certificate issued for each heat.
Slitting to the buyer's 700 mm and 870 mm widths, so no re-slitting was required at destination and the coils went straight to the customer's forming lines.
Break-bulk loading at Tianjin: 146 units with a total measurement of 151 CBM, shipped as one consignment to Chittagong.
A complete document set prepared against the letter of credit before the vessel loaded, so nothing had to be corrected after shipment.
Production And Quality Control
Quality control on an order of this size is a documentation exercise as much as a physical one. Every coil was tagged at the line with its grade, size, net and gross weight, coating weight and production date, which means any unit can be traced back to the heat it came from.
Inspection covered:
Coating mass against the Z275 minimum, checked on finished coils
Thickness and width against the ordered specification
Surface condition and coating appearance
Mill test certificate issued per heat
Final label, packing list and shipping document reconciliation

Export Packing And Loading
Break-bulk cargo is handled more often than containerised cargo and stays in the hold for the full voyage, so the packing was designed around repeated handling rather than around a single lift. VCI anti-rust paper and sealed end caps protected the coil faces and edges, heat-sealed PE film and kraft formed the moisture barrier, and metal edge protectors with circumferential strapping held the wraps in place against chafing. Desiccant and moisture-indicating labels were placed in the hold to manage condensation across the sea passage.
Project Summary
|
Item |
Detail |
|
Buyer |
Steel importer, Bangladesh |
|
Product |
Hot-dip galvanized steel coil (GI coil) |
|
Grade |
DX51D |
|
Specifications |
6 items, 1.5–2.5 mm × 700 mm / 870 mm |
|
Coating |
Z275 (275 g/m², both faces) |
|
Quantity |
786.30 MT |
|
Packing |
146 units, 151 CBM |
|
Route |
Tianjin, China → Chittagong, Bangladesh |
|
Trade term |
CFR Chittagong |
|
Payment |
Irrevocable L/C at sight |
Why Buyers Place Large Coil Orders With GNEE STEEL
✓ Multiple specifications produced and shipped under one contract
✓ Z275 and heavier coatings, verified coil by coil
✓ Slitting to the customer's width range
✓ Mill test certificate issued for every heat
✓ Export sea packing designed for break-bulk handling
✓ Document sets prepared to letter of credit terms
✓ Delivery to 120+ export destinations
Galvanized Steel Coil We Supply
|
Grade |
Standard |
Thickness |
Coating |
Typical Application |
|
DX51D |
EN 10346 |
0.20–4.00 mm |
Z100–Z600 |
General forming and fabrication |
|
DX52D |
EN 10346 |
0.30–3.00 mm |
Z100–Z600 |
Drawing and profiling |
|
DX53D / DX54D |
EN 10346 |
0.30–2.00 mm |
Z100–Z275 |
Deep drawing parts |
|
SGCC / SGCH |
JIS G3302 |
0.13–2.00 mm |
Z100–Z350 |
General purpose, roofing |
|
SGC340 / SGC440 |
JIS G3302 |
0.25–2.30 mm |
Z100–Z275 |
Structural components |
|
SS Grade 50 (340) |
ASTM A653/A653M |
1.00–3.00 mm |
Z275 |
Load-bearing structural parts |
Coil weight 3–10 t, inner diameter 508 mm or 610 mm, cut-to-length and slitting available. Thickness and coating combinations are confirmed per enquiry against mill capacity.


