galvanized steel plate
Need S550GD galvanized steel plate urgently for your project? GNEE Steel holds over 10,000 tons of ready stock in our warehouse, ensuring shipment within 7 days. This article covers the critical temperature limits of S550GD galvanized steel plate and our quality control measures to meet industry standards.
Galvanized steel is produced by immersing carbon steel in a molten zinc bath, creating a protective coating. It's used in construction, transportation, and manufacturing due to its excellent corrosion resistance and strength-to-weight ratio. S550GD is a high-strength grade ideal for load-bearing structures.

Galvanized steel plate
Temperature Performance Parameters of S550GD Steel
The temperature limits of S550GD galvanized steel plate are defined by both material science and industry standards:
| Performance Metric | Temperature Limit | Test Method |
|---|---|---|
| Maximum Service Temperature | 250°C (482°F) | Long-term exposure test |
| Heat Resistance | Up to 300°C (572°F) for short periods | Intermittent exposure test |
| Cold Resistance | Down to -40°C (-40°F) | Low-temperature impact test |
| Thermal Conductivity | 45 W/m·K at 20°C | Heat transfer measurement |
| Thermal Expansion Coefficient | 13.5 × 10⁻⁶/°C (20-100°C) | Dimensional change measurement |
Comparative Temperature Limits of Galvanized Steel Grades
Understanding how S550GD galvanized steel plate compares to other grades helps in material selection:
| Steel Grade | Yield Strength | Max Service Temperature | Min Working Temperature | Typical Applications |
|---|---|---|---|---|
| S235GD | ≥ 235 MPa | 250°C | -40°C | General construction |
| S350GD | ≥ 350 MPa | 250°C | -40°C | Medium-duty structures |
| S420GD | ≥ 420 MPa | 250°C | -40°C | Heavy-duty components |
| S550GD | ≥ 550 MPa | 250°C | -40°C | High-strength structures |
| S650GD | ≥ 650 MPa | 240°C | -30°C | Extreme strength applications |
Quality Control for Temperature Performance
At GNEE Steel, we implement strict quality control measures to ensure S550GD galvanized steel plate meets temperature-related performance requirements:
- Raw Material Inspection: Verify chemical composition of base steel before galvanizing
- Zinc Coating Control: Monitor coating thickness and uniformity across the entire surface
- Temperature Testing: Conduct high and low-temperature tests on each production batch
- Mechanical Testing: Perform tensile, bend, and impact tests at different temperatures
- Third-Party Certification: Obtain SGS/BV/Lloyd's certification for temperature performance
S550GD Galvanized Steel Plate Dimensions and Tolerances
| Dimension | Range | Tolerance |
|---|---|---|
| Thickness | 0.3-6.0 mm | ±0.05 mm (t ≤ 1.0mm) |
| Width | 600-1800 mm | ±2 mm |
| Length | 1000-6000 mm | ±3 mm |
| Coating Thickness | Z60-Z275 | ±10% |
| Flatness | ≤ 5 mm/m | - |
Temperature-Related Handling Recommendations
Proper handling of S550GD galvanized steel plate ensures it maintains its temperature resistance properties:
Store in covered areas to prevent extreme temperature exposure
Avoid stacking in direct sunlight for extended periods
Preheat to ambient temperature before installation in cold weather
Allow gradual cooling after welding to prevent thermal shock
Clean surface regularly to maintain zinc coating integrity
The temperature limits of S550GD galvanized steel plate make it suitable for a wide range of applications when used correctly. GNEE Steel's commitment to quality ensures our S550GD products consistently meet or exceed EN 10346 standards. Contact us for the latest S550GD galvanized steel plate inventory and technical data sheets.
Custom size/coating? Send your drawing for a 12-hour quick quote
|
Standard |
Grade |
C |
Si |
Mn |
P |
S |
Ti |
|
Forcold Forming Chinese Standard |
DX51D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
DX52D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX53D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX54D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX56D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX57D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
Forcold Forming Japanese Standard |
SGCC |
0.15 |
0.50 |
0.80 |
0.050 |
0.030 |
0.025 |
|
SGCD1 |
0.12 |
0.50 |
0.60 |
0.040 |
0.030 |
0.025 |
|
|
SGCD3 |
0.08 |
0.50 |
0.45 |
0.030 |
0.030 |
0.025 |
|
|
SGCD4 |
0.06 |
0.50 |
0.45 |
0.030 |
0.030 |
0.025 |
|
|
For Structure Japanese Standard |
SGC340 |
0.25 |
0.50 |
1.70 |
0.200 |
0.035 |
0.025 |
|
SGC400 |
0.25 |
0.50 |
1.70 |
0.200 |
0.035 |
0.150 |
|
|
SGC490 |
0.30 |
0.50 |
2.00 |
0.200 |
0.035 |
0.025 |
|
|
SGC510 |
0.30 |
0.50 |
2.50 |
0.200 |
0.035 |
0.025 |
|
|
For Structure AISI Standard |
S220GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
S250GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
|
S280GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
|
S320GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
|
S350GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.150 |
|
|
S550GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.150 |

Packaging and shipping


