galvanized steel
Are you sourcing S550GD galvanized steel for high-temperature applications? Quality is our priority. GNEE is an EN 10346 certified supplier, supporting 3rd-party inspection (SGS/BV/Lloyd's). This article explains how temperature impacts S550GD galvanized steel plate performance and what limits you need to consider.
Galvanized steel combines the strength of carbon steel with the corrosion resistance of zinc coating. It's a versatile material used across industries. Among the various grades, S550GD stands out for its high yield strength, making it suitable for demanding structural applications.

Galvanized steel plate
Key Temperature Limits for S550GD Steel
Understanding the temperature thresholds of S550GD galvanized steel plate is essential for proper application:
| Temperature Range | Effect on S550GD Steel | Recommended Usage |
|---|---|---|
| -40°C to +100°C | Optimal performance, full strength retention | Most structural applications |
| 100°C to 250°C | Minor strength reduction, stable zinc coating | Moderate temperature environments |
| 250°C to 300°C | Noticeable strength decrease, zinc oxidation accelerates | Short-term use only |
| Above 300°C | Significant strength loss, zinc coating degradation | Not recommended |
| Below -40°C | Increased brittleness risk, reduced ductility | Avoid unless specially tested |
High-Temperature Effects on S550GD Galvanized Steel
When S550GD galvanized steel plate is exposed to temperatures above its recommended limits, several changes occur:
- Zinc Coating Degradation: Above 250°C, the zinc coating starts to react with oxygen more rapidly, reducing corrosion protection.
- Strength Reduction: Tensile strength decreases by approximately 10% at 250°C compared to room temperature.
- Oxidation Rate Increase: Each 50°C temperature rise above 200°C doubles the oxidation rate of the steel substrate.
- Discoloration: Zinc coating may turn gray or black at temperatures above 300°C, indicating coating damage.
Low-Temperature Effects on S550GD Galvanized Steel
Exposure to temperatures below -40°C also affects S550GD galvanized steel plate:
- Ductility Loss: The material becomes less flexible, increasing the risk of cracking under impact or bending.
- Brittle Fracture Risk: Structural components may fail suddenly without visible deformation.
- Weld Joint Sensitivity: Welded areas are particularly vulnerable to low-temperature brittleness.
- Coating Adhesion: Extreme cold can affect the bond between zinc coating and steel substrate.
S550GD Galvanized Steel Plate Technical Specifications
| Specification | Details |
|---|---|
| Product Grade | S550GD+Z |
| Standard Compliance | EN 10346:2015 |
| Zinc Coating Mass | Z60 to Z275 (60-275 g/m²) |
| Thickness Tolerance | ±0.05 mm (for thickness ≤ 1.0mm) |
| Width Tolerance | ±2 mm |
| Flatness | ≤ 5 mm/m |
| Surface Quality | Regular spangle, zero spangle available |
Temperature-Related Application Guidelines
To maximize the performance of S550GD galvanized steel plate, follow these temperature-related guidelines:
Avoid continuous exposure to temperatures above 250°C
For low-temperature applications below -40°C, specify impact-tested material
Preheat material to 50-100°C before welding in cold environments
Use heat-resistant paint systems for applications near temperature limits
Regularly inspect zinc coating in high-temperature environments for degradation
Temperature significantly impacts the performance of S550GD galvanized steel plate. By adhering to recommended temperature limits and following proper application guidelines, you can ensure long-lasting performance. GNEE Steel offers premium S550GD products with complete technical support. Contact us for customized S550GD galvanized steel plate solutions and latest quotations.
Custom size/coating? Send your drawing for a 12-hour quick quote
|
Standard |
Grade |
C |
Si |
Mn |
P |
S |
Ti |
|
Forcold Forming Chinese Standard |
DX51D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
DX52D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX53D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX54D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX56D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX57D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
Forcold Forming Japanese Standard |
SGCC |
0.15 |
0.50 |
0.80 |
0.050 |
0.030 |
0.025 |
|
SGCD1 |
0.12 |
0.50 |
0.60 |
0.040 |
0.030 |
0.025 |
|
|
SGCD3 |
0.08 |
0.50 |
0.45 |
0.030 |
0.030 |
0.025 |
|
|
SGCD4 |
0.06 |
0.50 |
0.45 |
0.030 |
0.030 |
0.025 |
|
|
For Structure Japanese Standard |
SGC340 |
0.25 |
0.50 |
1.70 |
0.200 |
0.035 |
0.025 |
|
SGC400 |
0.25 |
0.50 |
1.70 |
0.200 |
0.035 |
0.150 |
|
|
SGC490 |
0.30 |
0.50 |
2.00 |
0.200 |
0.035 |
0.025 |
|
|
SGC510 |
0.30 |
0.50 |
2.50 |
0.200 |
0.035 |
0.025 |
|
|
For Structure AISI Standard |
S220GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
S250GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
|
S280GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
|
S320GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
|
S350GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.150 |
|
|
S550GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.150 |

Packaging and shipping


