ASTM A1008 Cold Rolled Steel

Cold Rolled Steel is a mill product made with a high degree of gauge accuracy and uniformity of physical characteristics. The smooth deoxidized matte finish gives an excellent base for paint, lacquer and enamel. Box annealing and absence of scale permit stamping and moderate drawing operations. Sheets bend flat on themselves without cracking. Oiling protects surface against rust.
Our Cold Rolled sheet and coil conform to ASTM A1008M.
- Thickness & Width
| 10GA (.1405 MAX – .1265 MIN) *** 48 60 |
|
11GA (.1256 MAX – .1116 MIN) *** 48 60 |
|
12GA (.1106 MAX – .0966 MIN) *** 48 60 |
|
13GA (.0947 MAX – .0827 MIN) *** 48 60 |
|
14GA (.0797 MAX – .0677 MIN) 36 48 60 |
|
16GA (.0648 MAX – .0538 MIN) 36 48 60 |
|
18GA (.0518 MAX – .0428 MIN) 36 48 60 |
|
20GA (.0389 MAX – .0329 MIN) 36 48 60 |
|
22GA (.0329 MAX – .0269 MIN) *** 48 60 |
|
24GA (.0269 MAX – .0209 MIN) *** 48 *** |
-
Cold Rolled Steel Specification
Thickness: 0.15-1.2mm
Width: 700-1250mm
Diameter: 6010mm
Diameter: 2000mm
Coil weight: 20T.
Grade: Q195A-Q235A, Q195AF-Q235AF, Q295A(B)-Q345A(B): SPCC, SPCD, SPCE, ST12-15 DCO1-06
Performance: Mainly used in low carbon steel grades, requires a good cold bending and welding performance, and some stamping performance.
Application: cold-rolled products with excellent mechanical and processing properties and thickness of theprecise characteristics are widely used in construction, automotive, transportation and other industries, and as a hot dip for raw materials.
The sheets are not heated duing the process, so there are no pitting and skin defects such as iron oxide, but good-quality and smooth surface. And the accuracy of the cold-rolled products' size is high. The performance and organization of the product can meet some special requirements, such as the electromagnetic properties, deep drawing properties.
Rolling process speed: 1000m/min
Forms of energy: electricity, water, steam
- Product Specifications
|
DeliverableGrade |
||||||||
|
Standard |
Q/BQB 408 |
JIS G3141 |
JFS A2001 |
EN 10130 |
DIN 1623 |
ASTM A1008 |
GB/T 5213 |
ISO 3574 |
|
Grade |
BLC |
SPCC |
JSC270C |
DC01 |
St12 |
CS |
|
CR1 |
|
|
BLD |
SPCD |
JSC270D |
DC03 |
RRSt13 |
DS |
|
CR2 |
|
|
BUSD |
SPCE |
JSC270E |
DC04 |
St14 |
DDS |
SC1 |
CR3 |
|
|
BUFD |
SPCF |
JSC270F |
DC05 |
|
EDDS |
SC2 |
CR4 |
|
|
BSUFD |
|
JSC260G |
DC06 |
|
|
SC3 |
CR5 |
|
Standard |
Grade |
ChemicalCompositionofColdRolledMildSteel(%) |
Mechanicalpropertiesofcoldrolledsteel |
||||||
|
|
|
C |
Si |
Mn |
P |
S |
Yielding Strength |
Tensile Strength |
Elongation |
|
JISG3141 |
SPCC |
0.15 max |
- |
0.60 max |
0.10 max |
0.05 max |
|
|
|
|
|
SPCD |
0.12 max |
- |
0.50 max |
0.04 max |
0.04 max |
≤ 240 |
≥ 270 |
≥ 41 |
|
|
SPCE |
0.10 max |
- |
0.45 max |
0.03 max |
0.03 max |
≤ 220 |
≥ 270 |
≥ 43 |
|
|
SPCF |
0.08 max |
- |
0.45 max |
0.03 max |
0.03 max |
≤ 210 |
≥ 270 |
≥ 45 |
|
JIS G3141 Surface quality classification: B-finish; D-mirror finish |
|||||||||
|
EN 10130 |
DC01 |
0.12 max |
- |
0.60 max |
0.045 max |
0.045 max |
140-280 |
270-410 |
≥ 28 |
|
|
DC03 |
0.10 max |
- |
0.45 max |
0.035 max |
0.035 max |
140-240 |
270-370 |
≥ 34 |
|
|
DC04 |
0.08 max |
- |
0.40 max |
0.030 max |
0.030 max |
140-210 |
270-350 |
≥ 38 |
|
|
DC05 |
0.06 max |
- |
0.35 max |
0.025 max |
0.025 max |
140-180 |
270-330 |
≥ 40 |
|
|
DC06 |
0.02 max |
- |
0.25 max |
0.020 max |
0.020 max |
120-170 |
270-330 |
≥ 41 |
|
Surface type: A, B; Surface specification: b=special smooth, g=smooth, m=non-glossy, r=rude |
|||||||||



