Galvanized steel coil
Galvanized steel coil, immersing the thin steel plate in the molten zinc bath, and adhering a layer of zinc thin on the surface. It is mainly produced by the continuous galvanizing process, that is, the coiled steel plate is continuously immersed in the zinc-melted plating tank to make galvanized steel plate; alloyed galvanized steel plate. This kind of steel plate is also made by the hot-dip method, but it is heated to about 500 °C immediately after exiting the tank to form an alloy film of zinc and iron. This galvanized steel coil has good paint adhesion and weldability.
DX53D is a cold-rolled galvanized steel coil renowned for its exceptional properties. Similar to DX52D, the "DX" in DX53D refers to the base material. The number "53" indicates its suitability for deep drawing, and higher numbers like 51, 52, and 54 represent different grades with varying properties. The final "D" signifies its excellent bending and forming capabilities.

European EN 10346 Standard Galvanized Steel Coil
Low carbon steel for cold forming (DX51D – DX54D)
DX51D is equivalent to Commercial Steel, curved and profiled
DX52D is equivalent to Forming Steel
DX53D is equivalent to Deep Drawing Steel
DX54D is equivalent to Extra Deep Drawing Steel
Structural Steels (S220GD – S350GD)
S220GD,S250GD,S280GD,S320GD,S350GD
Use structural steel for high load-bearing capacity, with a yield strength of 220-350
-
Mechanical Properties
| Grade | Coating | Standard | Yield strength Re (MPa) | Tensile strength Rm (MPa) | Elongation A80 (min %) | r90 (min) | n90 (min) |
|---|---|---|---|---|---|---|---|
| DX51D | Z, ZA, ZF | EN 10346 | - | 270 – 500 | 22 | - | - |
| DX52D | Z, ZA, ZF | EN 10346 | 140 – 300 ²) | 270 – 420 | 26 | - | - |
| DX53D | Z, ZA, ZF | EN 10346 | 140 – 260 | 270 – 380 | 30 | - | - |
| DX54D | Z, ZA, ZF | EN 10346 | 120 – 220 | 260 – 350 | 36 | 1.6 ⁴) | 0.18 |
| DX56D | Z, ZA, ZF | EN 10346 | 120 – 180 | 260 – 350 | 39 | 1.9 ⁵) | 0.21 ⁵) |
| DX57D | Z, ZA | EN 10346 | 120 – 170 | 260 – 350 | 41 | 2.1 ⁵) | 0.22 |
Specifications Table
| Product name | Galvanized Steel Coil |
| Material | ASTM A653, DX51D,DX52D DX53D DX54D SGCC |
| Zinc Coating | 40-275g/m2 |
| Thickness | 0.2 - 3.0mm |
| Width | 600-1500 mm |
| Coil ID | 508/610mm |
| Coil weight | 3-8 tons |
| Surface Structure | Mini/Big Spangle / Zero Spangle |
| Surface Treatment | Anti-Finger printing ,Chromated, oiled/ non-oiled |
| Package | standard export package (Detailed picture is as follows) |
| Hardness | soft (normal), hard, full hard(G300-G550) |
| HS code | 721049 |
| Country of origin | China |
| Business type | Supplier and manufacturer |
DX53D+Z Galvanized Steel Equivalent Material
| Grade | Euronorm | China GB | Japanese JIS | US ASTM | ||
| EN 10346:2009 | GBT 2518-2008 | JIS:G3302-2005 | ASTM A653M | |||
| DX53D+Z | DX53D+Z | DX53D+Z | SGCD2 | FS TypeA FS TypeB |
||
DX53D+Z Galvanized Steel Metal Content
| Grade | Element | C | Si | Mn | P | S | Ti |
| DX53D+Z | Min. |
- | - | - | - | - | - |
Max. |
0.12 | 0.5 | 0.6 | 0.12 | 0.045 | 0.3 |
Tensile strength :270~380 MPa
Yield strength :140~260 MPa
Elongation :≥30%
GNEE STEEL supplies high-quality DX53D galvanized steel sheet with strict quality control, flexible specifications, reliable delivery and professional technical support.
Contact GNEE STEEL today to receive your competitive quotation.
Packaging and shipping



