galvanized steel sheet
EN 10346 DX53D Z275 hot dipped galvanized steel sheet is a deep drawing quality zinc-coated steel product manufactured through continuous hot-dip galvanizing. It uses low-carbon cold rolled steel as the base material and applies a Z275 zinc coating, providing excellent corrosion protection combined with superior forming performance.
DX53D Z275 galvanized steel sheet is widely used in automotive components, structural panels, appliance housings, electrical enclosures, HVAC systems, and light construction where both surface quality and long-term durability are critical.

-
Chemical Composition
| Element | C | Mn | P | S | Al |
|---|---|---|---|---|---|
| Max % | 0.08 | 0.45 | 0.030 | 0.025 | 0.015 |
-
Mechanical Properties
| Property | Typical Value |
|---|---|
| Yield Strength | 140–220 MPa |
| Tensile Strength | 270–380 MPa |
| Elongation | ≥36% |
| Hardness | ≤110 HV |
DX51D vs DX53D: Structural and Forming Comparison
| Feature | DX51D | DX53D |
|---|---|---|
| Steel Type | Commercial Quality | Deep Drawing Quality |
| Elongation | ≥22% | ≥36% |
| Surface Finish After Forming | Fair | Excellent |
| Typical Use | Roofing, profiles | Auto panels, appliances |
Case Example
A ventilation duct manufacturer experienced cracking issues using DX51D. After switching to DX53D Z275 galvanized steel sheet, production defects dropped by 34% and product lifespan improved significantly due to enhanced corrosion protection.
Z275 Coating Performance
| Coating Grade | Zinc Weight (g/m²) | Typical Service Environment |
|---|---|---|
| Z100 | 100 | Indoor |
| Z180 | 180 | Semi-outdoor |
| Z275 | 275 | Outdoor & humid |
| Z450 | 450 | Marine |
| Thickness (mm) | Width (mm) | Length (mm) |
|---|---|---|
| 0.30–3.00 | 600–1500 | 1000–6000 |
-
Coating Table
| Coating designation | Minimum total coating mass, both surfaces* (g/m²) | Guidance value for coating thickness per surface (typical μm) |
|---|---|---|
| Z100 | 100 | 7 |
| Z140 | 140 | 10 |
| Z180 | 180 | 13 |
| Z200 | 200 | 14 |
| Z225 | 225 | 16 |
| Z275 | 275 | 20 |
| Z350 | 350 | 25 |
| Z450 | 450 | 32 |
| Z600 | 600 | 42 |
| ZA095 | 95 | 7 |
| ZA130 | 130 | 10 |
| ZA155 | 155 | 11 |
| ZA185 | 185 | 14 |
| ZA200 | 200 | 15 |
| ZA255 | 255 | 20 |
| ZA300 | 300 | 23 |
| ZF080 | 80 | 6 |
| ZF100 | 100 | 7 |
| ZF120 | 120 | 8 |
| ZF140 | 140 | 10 |
Main Applications
- Automotive body inner panels
- Roofing and wall cladding
- Electrical enclosures
- HVAC duct systems
- Steel structures and frames
- Appliance housings
GNEE STEEL supplies high-quality DX53D Z275 galvanized steel sheet with strict quality control, flexible specifications, reliable delivery and professional technical support.
📩 Contact GNEE STEEL today to receive your competitive quotation.



