Home-Knowledge-

Content

EN 10346 Hot Dipped Galvanized Steel Sheet DX53D

galvanized steel

 

Gnee supply DX53D cold rolled and hot rolled galvanized steel, with 100% factory low price and high-quality. We can manufacture and sell galvanized steel with a width of 800-1250mm and a coating weight of 60-300g/m3. We manufacture galvanized steel coils according to EN 10346, ASTM A653 standard. We have sufficient galvanized steel coil stock for fast delivery.

 

Thickness, width, length, zinc layer, standard, material, etc. can all be customized. Gnee can provide normal spangle, skinpassed spangle, regular spangle, minimized spangle or customize it for your requirements.

 

hot rolled galvanized steel

Product Specification

 

Product DX53D Galvanized Steel Sheet
Standards JIS G3302, ASTM A653M, EN10327, DIN 17162, EN 10142, EN 10147, EN 10292
Material Grades DX51D+Z, DX52D+Z, DX53D+Z, DX54D+Z, S220GD+Z, DX51D+Z/SGCC/A653, etc.
Zinc Coating 40-600g/㎡
Width 1000mm, 1219mm, 1250mm, 1500mm, or customized
Thickness 0.1-6.5mm or customized
Surface Finish Regular Spangle, Big Spangle, Minimum Spangle, Zero Spangle

 

DX53D galvanized steel sheet is a steel plate with a layer of zinc on the surface, which is designed to prevent corrosion on the surface of the steel plate and extend its service life. This kind of galvanized sheet has a good appearance and must not have defects that are harmful to the use of the product, such as no plating, holes, cracks and scum, excessive plating thickness, scratches, chromic acid dirt, white rust, etc.

 

The chemical properties of DX51D galvanized steel sheet are mainly reflected in its corrosion resistance, which is attributed to the metallic zinc layer on its surface. In terms of physical properties, this steel plate has good coating density and weldability. Additionally, when the steel plate thickness is less than or equal to 0.35 mm, its minimum elongation is reduced by 7% from the value in the table.

 

What Does the DX53D Name Mean?

 

D – Indicates it is designed for deep-drawing applications

X – Indicates the steel is not specified for a particular strength level, allowing for high ductility.

53 – Represents the deep drawing grade, which is more formable than DX51D and DX52D.

D – Means the steel is hot-dip galvanized.

 

DX53D Steel Equivalent Grades

Under the EN 10346:2009 standard, DX53D corresponds to steel grade 1.0355. In the EN 10346:2015 standard, its equivalent designation is 1.0952.

 

Application of DX53D Galvanized steel sheet

 

Architecture: roof, garage, wall, pipe, and combined house.

Car: muffler, exhaust pipe, wiper accessories, fuel tank, truck boxes etc.

Home appliances: refrigerator, gas stove, air conditioning, electronic microwave oven, LCD frame, CRT explosion-proof belt, LED backlight source, electrical cabinet, etc.

Agriculture: pig, chicken house, barn, pipeline and other greenhouse

Other: thermal insulation cover, heat exchanger, dryer, water heater, etc.

 

Galvanized steel is to prevent the steel plate surface from corrosion to extend its service life, in the steel plate surface coated with a layer of metal zinc, the zinc coated steel plate are called galvanized sheet. According to the production and processing methods can be divided into the following categories:

 

(1) Hot dip galvanized steel. Thin plate in melting zinc bath, make its surface adhesion of a layer of zinc sheet. At present mainly adopts continuous galvanizing process, namely the continuous roll of steel plate in the melt zinc plating tank made of galvanized steel sheet;
(2) The alloying of galvanized steel. This kind of steel plate is made by hot dip method, but after the slot, immediately heated to a temperature of about 500 ℃, it make the generation of zinc and iron alloy membrane. This kind of galvanized sheet with good coating of sex and weldability;
(3) Electric galvanized steel. Made this kind of galvanized steel plating method has good workability. But the coating is thinner,the corrosion resistance and the method of hot dip galvanized sheet
(4) The single side and double difference galvanized steel plating. Single galvanized steel, that is, only in a galvanized products. Material in the antirust processing, welding, painting, machining, etc., two-sided galvanized sheet better adaptability.In order to overcome the single side not the shortcoming of zinc coating, and one in the other side is coated with a thin layer of zinc galvanized sheet, namely double difference galvanized sheet;
(5) Alloy and composite galvanized steel. It is made from zinc and other metals such as aluminum, lead, zinc alloy and composite plating of steel plate. This steel has excellent rust resistance, and good coating performance,Besides the above five kinds of color galvanized steel plate, printing and coating of galvanized steel sheet, PVC laminated galvanized steel sheet, etc. But still by far the most commonly used for hot dip galvanized sheet.

 

  • Mechanical Properties

 

Grade Coating Standard Yield strength Re (MPa) Tensile strength Rm (MPa) Elongation A80 (min %) r90 (min) n90 (min)
DX51D Z, ZA, ZF EN 10346 - 270 – 500 22 - -
DX52D Z, ZA, ZF EN 10346 140 – 300 ²) 270 – 420 26 - -
DX53D Z, ZA, ZF EN 10346 140 – 260 270 – 380 30 - -
DX54D Z, ZA, ZF EN 10346 120 – 220 260 – 350 36 1.6 ⁴) 0.18
DX56D Z, ZA, ZF EN 10346 120 – 180 260 – 350 39 1.9 ⁵) 0.21 ⁵)
DX57D Z, ZA EN 10346 120 – 170 260 – 350 41 2.1 ⁵) 0.22

 

  • Coating Table

 

Coating designation Minimum total coating mass, both surfaces* (g/m²) Guidance value for coating thickness per surface (typical μm)
Z100 100 7
Z140 140 10
Z180 180 13
Z200 200 14
Z225 225 16
Z275 275 20
Z350 350 25
Z450 450 32
Z600 600 42
ZA095 95 7
ZA130 130 10
ZA155 155 11
ZA185 185 14
ZA200 200 15
ZA255 255 20
ZA300 300 23
ZF080 80 6
ZF100 100 7
ZF120 120 8
ZF140 140 10

 

GNEE STEEL supplies DX53D hot dip galvanized steel with consistent quality, customized specifications and reliable global delivery. Our customers trust our technical expertise and stable supply system to support their long-term production needs.

 

Send your inquiry to GNEE STEEL today and receive your competitive quotation.

Contact now

Packaging and shipping

DX53D hot dip galvanized steel

SEND INQUIRY

SEND INQUIRY