Galvanized Steel
DX53D galvanized steel sheet is a steel plate with a layer of zinc on the surface, which is designed to prevent corrosion on the surface of the steel plate and extend its service life. This kind of galvanized sheet has a good appearance and must not have defects that are harmful to the use of the product, such as no plating, holes, cracks and scum, excessive plating thickness, scratches, chromic acid dirt, white rust, etc.
The chemical properties of DX51D galvanized steel sheet are mainly reflected in its corrosion resistance, which is attributed to the metallic zinc layer on its surface. In terms of physical properties, this steel plate has good coating density and weldability. Additionally, when the steel plate thickness is less than or equal to 0.35 mm, its minimum elongation is reduced by 7% from the value in the table.

European EN 10346 Standard Galvanized Steel
Low carbon steel for cold forming (DX51D – DX54D)
DX51D is equivalent to Commercial Steel, curved and profiled
DX52D is equivalent to Forming Steel
DX53D is equivalent to Deep Drawing Steel
DX54D is equivalent to Extra Deep Drawing Steel
Structural Steels (S220GD – S350GD)
S220GD,S250GD,S280GD,S320GD,S350GD
Use structural steel for high load-bearing capacity, with a yield strength of 220-350
-
Mechanical Properties
| Grade | Coating | Standard | Yield strength Re (MPa) | Tensile strength Rm (MPa) | Elongation A80 (min %) | r90 (min) | n90 (min) |
|---|---|---|---|---|---|---|---|
| DX51D | Z, ZA, ZF | EN 10346 | - | 270 – 500 | 22 | - | - |
| DX52D | Z, ZA, ZF | EN 10346 | 140 – 300 ²) | 270 – 420 | 26 | - | - |
| DX53D | Z, ZA, ZF | EN 10346 | 140 – 260 | 270 – 380 | 30 | - | - |
| DX54D | Z, ZA, ZF | EN 10346 | 120 – 220 | 260 – 350 | 36 | 1.6 ⁴) | 0.18 |
| DX56D | Z, ZA, ZF | EN 10346 | 120 – 180 | 260 – 350 | 39 | 1.9 ⁵) | 0.21 ⁵) |
| DX57D | Z, ZA | EN 10346 | 120 – 170 | 260 – 350 | 41 | 2.1 ⁵) | 0.22 |
DX53D+Z Galvanized Steel Sheet Features
Galvanized steel sheet is widely used in various environments and has a long anti-corrosion life. The anti-corrosion life is different in different environments.
The processing cost is low, and the anti-corrosion cost of galvanized steel sheet is lower than other paint coatings.
Durable, in the suburban environment, the standard galvanized anti-corrosion layer does not need to be repaired and can be maintained for more than 50 years. In cities or offshore areas, the standard galvanized anti-corrosion coating can be maintained for 20 years without repairs.
Good reliability. The galvanized layer and the steel are metallurgically combined and become part of the rigid surface, so the durability of the coating is relatively reliable.
The coating has strong toughness, and the zinc coating forms a special metallurgical structure, which can withstand mechanical damage during transportation and use.
Integrity protection: All parts of the plated parts can be galvanized, even in recesses, sharp corners and hidden places can be fully protected.
It saves time and effort. The galvanizing construction speed is faster than other coating construction methods, which can avoid the time required for on-site painting after installation.
DX53D+Z Galvanized Steel Sheet Equivalent Material
| Grade | Euronorm | China GB | Japanese JIS | US ASTM | ||
| EN 10346:2009 | GBT 2518-2008 | JIS:G3302-2005 | ASTM A653M | |||
| DX53D+Z | DX53D+Z | DX53D+Z | SGCD2 | FS TypeA FS TypeB |
||
DX53D+Z Galvanized Steel Sheet Standard Specification
| Thickness | 0.12~2.5mm | ||||||
| Width | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc | ||||||
| Length | 1000-6000 or Since the custom | ||||||
| Surface | Normal (uneven) spangle/ Skinpassed spangle/ Regular spangle / Minimized spangles | ||||||
| Finish | |||||||
| Form | Coils, Foils, Rolls, Plain coil, Shim coil, Perforated coil, Chequered coil, Strip, Flats, Blank (Circle), Ring (Flange) etc. |
||||||
DX53D+Z Galvanized Steel Sheet Metal Content
| Grade | Element | C | Si | Mn | P | S | Ti |
| DX53D+Z | Min. |
- | - | - | - | - | - |
Max. |
0.12 | 0.5 | 0.6 | 0.12 | 0.045 | 0.3 |
Tensile strength :270~380 MPa
Yield strength :140~260 MPa
Elongation :≥30%
Application of DX53D Galvanized steel sheet
Architecture: roof, garage, wall, pipe, and combined house.
Car: muffler, exhaust pipe, wiper accessories, fuel tank, truck boxes etc.
Home appliances: refrigerator, gas stove, air conditioning, electronic microwave oven, LCD frame, CRT explosion-proof belt, LED backlight source, electrical cabinet, etc.
Agriculture: pig, chicken house, barn, pipeline and other greenhouse
Other: thermal insulation cover, heat exchanger, dryer, water heater, etc.

GNEE STEEL supplies high-quality DX53D galvanized steel sheet with strict quality control, flexible specifications, reliable delivery and professional technical support.
📩 Contact GNEE STEEL today to receive your competitive quotation.


