Home-Products- Steel Grating - Galvanized Steel Grating-

Content

video

19-W-4 Galvanized Steel Grating For Industrial Platforms And Walkways

19-W-4 galvanized steel grating is one of the most widely specified welded bar grating patterns for industrial platforms, walkways and catwalks.

PRODUCT INTRODUCTION

PRODUCT INTRODUCTION

Gnee Steel (Tianjin) Co., Ltd. is one of the most reliable manufacturers and suppliers of 19-w-4 galvanized steel grating for industrial platforms and walkways in China. Welcome to wholesale customized 19-w-4 galvanized steel grating for industrial platforms and walkways at low price from our factory. If you have any enquiry about free sample and cheap products, please feel free to email us.

 

19-W-4 galvanized steel grating is one of the most widely specified welded bar grating patterns for industrial platforms, walkways and catwalks. It combines a proven 1-3/16 in bearing bar spacing with a 4 in cross bar spacing, delivering a strong, open and economical flooring surface that drains water, passes light and air, and resists corrosion thanks to a hot-dip galvanized finish.

 

GNEE STEEL supplies 19-W-4 galvanized steel grating in a wide range of bearing bar sizes, panel dimensions and surface options, manufactured to ANSI/NAAMM MBG 531 and finished with hot-dip galvanizing to ASTM A123 for long-term corrosion protection.

What Is 19-W-4 Grating?

 

The 19-W-4 designation follows the standard North American grating numbering system:

19 – bearing bars spaced 19/16 in (1-3/16 in, approx. 30 mm) center to center

W – welded construction: bearing bars are electro-forged to cross bars at every intersection

4 – cross bars spaced 4 in (approx. 100 mm) center to center

This configuration is the industry default for standard-duty industrial flooring. The open mesh provides roughly 70–80% open area depending on bearing bar size, which allows excellent drainage, ventilation and debris shedding while keeping a comfortable walking surface for industrial footwear.

 

19-W-4 Galvanized Steel Grating Specifications

 

Item

Specification

Grating type

Welded steel bar grating

Designation

19-W-4

Bearing bar spacing

1-3/16 in (19/16 in) center to center

Cross bar spacing

4 in center to center

Material

ASTM A36 / A1011 carbon steel, Q235B, S275JR, SS400

Standard

ANSI/NAAMM MBG 531, YB/T 4001.1

Surface

Smooth or serrated

Finish

Hot-dip galvanized (ASTM A123), mill or painted also available

Panel width

2 ft, 3 ft (24 in / 36 in) standard

Panel length

Up to 24 ft; 3 x 20 ft panels common

Cross bar type

Twisted square bars 5x5, 6x6, 8x8 mm or round bars

 

Send Your Requirements

Bearing Bar Sizes for Platforms and Walkways

 

The 19-W-4 designation defines the spacing pattern, not a single load rating. Bearing bar height and thickness must be selected according to span and load. Common sizes for platform and walkway duty include:

 

Bearing Bar Size

Duty Level

Typical Use

1 in x 1/8 in

Light duty

Short-span walkways, drainage covers

1 in x 3/16 in

Standard duty

General pedestrian walkways, access platforms

1-1/4 in x 3/16 in

Standard duty

Industrial platforms, catwalks (most common)

1-1/2 in x 3/16 in

Medium duty

Longer spans, mezzanines, trench covers

2 in x 3/16 in or heavier

Heavy duty

Long spans, heavier service loads

 

As a rule of thumb, a taller bearing bar allows a longer clear span with less deflection. For example, published load tables for 19-W-4 grating with 1-1/4 x 3/16 in bearing bars show allowable uniform loads of roughly 1,600 psf at a 3 ft span and about 900 psf at a 4 ft span, at a deflection limit of L/240. Always confirm the final selection against the applicable load table and project requirements.

 

Send Your Requirements

Why Hot-Dip Galvanizing Matters

 

Platforms and walkways are frequently exposed to rain, wash-down water, condensation and industrial fumes. Hot-dip galvanizing after fabrication coats the bearing bars, cross bars, welds and cut edges in a metallurgically bonded zinc layer that:

 

Protects the welded joints, which are the most corrosion-sensitive areas

Provides barrier and sacrificial protection, so small scratches do not rust through

Extends service life to typically 15–30 years in normal atmospheric environments

Requires virtually no maintenance compared with painted finishes

 

All cutting, banding, notching and tread fabrication should be completed before galvanizing so the zinc covers every fabricated edge. If field cutting is unavoidable, exposed areas should be repaired with zinc-rich paint.

 

Applications

 

1.Industrial platforms – machinery access, process equipment flooring, maintenance platforms

2.Walkways and catwalks – elevated access around tanks, conveyors, pipe racks and production lines

3.Mezzanine flooring – a lightweight, open alternative to solid steel plate

4.Drainage and trench covers – open mesh lets water and debris pass straight through

5.Stair treads – fabricated with nosing and end plates; serrated tops for wet or oily areas

6.Power plants, water treatment and chemical facilities – where drainage, ventilation and corrosion resistance are all required

 

Application scenarios of steel grating

 

Installation Notes

 

Bearing bars must span across the supporting beams – installing the panel in the wrong direction is the most common and most serious installation error

Use grating clips (minimum two clips per panel, four for panels subject to removal) rather than welding panels to supports when panels must be removable

Close panel edges with banding bars to strengthen the edge and improve safety

Consider serrated bearing bars for outdoor, wet or oily walkways where slip resistance is critical

 

Packaging and Delivery

 

Panels are inspected, stacked on steel pallets or metal skids, fixed with steel strapping and wrapped in plastic film, normally 1–2 tons per pallet for convenient unloading and storage. Quality certificates are issued for each batch before shipment.

Packaging And Delivery of Steel Grating
Packaging And Delivery of Steel Grating
Packaging And Delivery of Steel Grating
 
 

FAQ

 

1. Is 19-W-4 suitable for vehicle traffic?

Standard 19-W-4 with light bearing bars is for pedestrian duty. For forklift or H-20 truck traffic, heavy-duty 19-W-4 with 1/4 in or thicker bearing bars is required.

 

2. What is the difference between smooth and serrated surface?

Serrated bearing bars have notched top edges that provide much better slip resistance in wet, muddy or oily conditions, at a slightly higher cost.

 

3. Can panels be cut to size on site?

Yes, but hot-dip galvanized panels should be ordered cut-to-size where possible. Field cuts should be repaired with zinc-rich coating.

 

4. What panel sizes are available?

Standard widths are 2 ft and 3 ft; lengths up to 24 ft. Custom sizes, banding and cutouts are available on request.

 

5. How do I specify 19-W-4 grating correctly?

Always state bearing bar size, span direction, panel dimensions, surface type (smooth/serrated), finish and quantity in your RFQ.

 

Hot Tags: 19-w-4 galvanized steel grating for industrial platforms and walkways, China 19-w-4 galvanized steel grating for industrial platforms and walkways manufacturers, suppliers, factory

SEND INQUIRY

SEND INQUIRY