Gnee Steel (Tianjin) Co., Ltd. is one of the most reliable manufacturers and suppliers of 19-w-4 galvanized heavy-duty steel grating in China. Welcome to wholesale customized 19-w-4 galvanized heavy-duty steel grating at low price from our factory. If you have any enquiry about free sample and cheap products, please feel free to email us.
19-W-4 heavy-duty steel grating is the reinforced version of the industry-standard 19-W-4 welded grating pattern, engineered for areas with H-10 / H-20 vehicle traffic, forklifts and heavy concentrated loads. It uses the same 1-3/16 in bearing bar spacing and 4 in cross bar spacing as standard 19-W-4, but with deeper, thicker bearing bars – from 1 in to 6 in depths and 1/4 in to 1/2 in thicknesses – combined with a hot-dip galvanized finish for long-term corrosion protection.
GNEE STEEL manufactures and supplies 19-W-4 heavy-duty welded steel grating to ANSI/NAAMM MBG 531 with hot-dip galvanizing to ASTM A123, for industrial and infrastructure projects worldwide.
What Makes 19-W-4 Grating "Heavy-Duty"?
The 19-W-4 pattern describes only the spacing: bearing bars at 19/16 in (1-3/16 in) centers and cross bars at 4 in centers. Heavy-duty 19-W-4 is created by selecting heavier bearing bar sections:

Deeper bars – 1 in up to 6 in depths, greatly increasing bending strength and allowable span
Thicker bars – 1/4 in, 5/16 in, 3/8 in and 1/2 in thicknesses for resistance to impact and repeated rolling loads
Heavier cross bars – 5/16 in or larger twisted square / round bars for stronger welded joints
This makes heavy-duty 19-W-4 suitable for vehicular traffic areas, while retaining the same high open area and drainage performance that the pattern is known for.
19-W-4 Heavy-Duty Grating Specifications
|
Item |
Specification |
|
Grating type |
|
|
Designation |
19-W-4 |
|
Bearing bar spacing |
1-3/16 in (19/16 in) center to center |
|
Cross bar spacing |
4 in center to center |
|
Bearing bar depth |
1 in – 6 in |
|
Bearing bar thickness |
1/4 in, 5/16 in, 3/8 in, 1/2 in |
|
Material |
ASTM A36 / A1011 carbon steel, Q235B, S275JR |
|
Standard |
ANSI/NAAMM MBG 531 |
|
Surface |
Smooth or serrated |
|
Finish |
Hot-dip galvanized (ASTM A123), painted or mill finish |
|
Panel width |
2 ft, 3 ft standard |
|
Panel length |
Up to 24 ft |
|
Typical traffic rating |
H-10, H-20, forklift traffic |
Load Performance
Load capacity depends on bearing bar size, clear span, material grade and deflection criteria. Published load tables for 19-W-4 grating illustrate how capacity scales with bar size (allowable uniform load, deflection limit L/240):
|
Bearing Bar Size |
3 ft Span |
4 ft Span |
5 ft Span |
Approx. Weight |
|
1-1/4 x 3/16 in (standard) |
~1,619 psf |
~911 psf |
~583 psf |
~8.9 psf |
|
1-1/2 x 3/16 in |
higher |
higher |
higher |
~10.6 psf |
|
2 x 1/4 in (heavy-duty) |
substantially higher |
– |
– |
~11.5+ psf |
These values are for reference only. For vehicular applications (H-10 / H-20, forklifts), the grating must be selected against the actual wheel load, wheel contact area and support spacing, and confirmed by engineering calculation. GNEE STEEL provides load data and specification confirmation before production for every heavy-duty order.
Applications of Heavy-Duty 19-W-4 Grating
1.Vehicular trench and drainage covers – roadways, parking areas, truck docks where the open mesh must carry wheel loads
2.Loading docks and plant floors – forklift routes and heavy material handling areas
3.Highway and bridge decking – permanent open steel decking under traffic
4.Airfield and port areas – drainage grates and pavement inlays subject to heavy axle loads
5.Machine room and equipment floors – floors around heavy process equipment with concentrated loads
6.Sump pits and utility vaults covers – removable heavy panels for maintenance access

Surface and Fabrication
For heavy-duty grating in outdoor or wet service, hot-dip galvanizing after fabrication is strongly recommended: it protects every weld joint and cut edge, which are the areas under the highest stress. Serrated bearing bars are available where tires and boots operate in wet or oily conditions.
All fabrication – cutting to size, banding, notching, framed openings and pressure-locking of cross bars – should be completed before galvanizing.
GNEE STEEL confirms every fabrication drawing with the buyer before production.
Packaging and Delivery
Panels are inspected and issued with quality certificates, then stacked on metal skids, fixed with steel strapping and wrapped in plastic film (typically 1–2 tons per pallet). Loading plans are prepared to match container dimensions.

FAQ
1. What traffic can heavy-duty 19-W-4 carry?
With correctly selected bearing bars (typically 1/4 in thick or heavier), it is used for H-10, H-20, automobile and forklift traffic. Final selection must be verified against wheel loads and span.
2. Can heavy-duty grating use 2 in cross bar spacing instead?
Yes, that is the 19-W-2 pattern. Closer 2 in cross bars give a tighter mesh and better transverse load distribution, at higher weight and cost.
3. Is serrated surface available for heavy-duty panels?
Yes, serrated tops are available in all heavy-duty sizes and are recommended for wet vehicular areas.
4. What is the maximum panel length?
Up to 24 ft standard; longer panels may be possible with deeper bearing bars – confirm with us.
5. Do you provide load calculations?
We provide published load table data for the selected configuration and confirm specifications before production; final project verification should be completed by the responsible engineer.
Hot Tags: 19-w-4 galvanized heavy-duty steel grating, China 19-w-4 galvanized heavy-duty steel grating manufacturers, suppliers, factory












