Electrical steels are used in the cores of electromagnetic devices such as motors, generators, and transformers because of the ability of ferromagnetic materials to magnify the magnetic effects of current-carrying coils. Of the available ferromagnetic materials, iron and its alloys offer the best cost beneficial performance (Cardoso et al., 2013; Zu et al., 2015; Liu et al., 2015).
Gnee Steel (Tianjin) Co., Ltd. is one of the most reliable manufacturers and suppliers of electrical steels in China. Welcome to wholesale customized electrical steels at low price from our factory. If you have any enquiry about free sample and cheap products, please feel free to email us.
The torque of a motor is proportional to B2, where B is the intensity of magnetization operating between its stationary and moving parts. Because of this square law relationship even small gains in B lead to useful increases in torque and thus output power.
In the case of transformers, the large magnetizations available from iron enable voltage transformations to be carried out by windings of an acceptable size. The voltage appearing at a transformer winding is related to the rate of flux change dΦ/dt for the core and is normally of sine form so that operation at high peak flux levels is important.
It is clear that for steels to be of the most use for electrical machines a high working induction is desired, as close as practicable to the approximately 2 T at which iron becomes saturated.
At the same time a high permeability (ratio of B to H) or flux magnifying property is desired (Liu et al., 2015). The effective permeability of iron reduces as saturation is approached leading to heavier demands on magnetizing current.
Additionally the duties of core steel must be executed without serious wastage of energy within the metal (called power loss or core loss) due to the periodic magnetic reversals involved in use (Cardoso et al., 2013; Tada et al., 2013; Lee et al., 2014). The range of electrical steels available has arisen out of the appropriate compromises struck between these factors. Different types of steel suit different applications (see Table 1).
Table 1. Typical electrical steels
Type of steel
Thickness (mm)
Power loss
Conventional density (g cm−3)
Relative permeability
Usage
Non-oriented motor grade requiring customer anneal
0.65
7.0 W kg−1B^ 1.5 T, 50 Hz
7.85
3000 at 1.5 T
Small
Non-oriented superior motor grade, requiring customer anneal