The oil-immersed transformer is a new type of high-performance transformer with a more reasonable structure and better performance. Its three-dimensional wound iron core has a three-dimensional arrangement of equilateral triangles. There is no air gap in the magnetic circuit and the winding is tighter. , the three magnetic circuits have the same length and are the shortest. The cross-sectional area of the core leg is closer to a circle, so the performance is further improved, the loss is reduced, the noise is reduced, the three terms are balanced, and the third harmonic component is reduced. This product is more It is suitable for the transformation of power grids in urban and rural areas, industrial and mining enterprises, and is more suitable for combined transformers and transformers for prefabricated substations.
Oil-immersed transformers use oil as the main insulation method of the transformer and rely on oil as the cooling medium, such as oil-immersed self-cooling, oil-immersed air-cooling, oil-immersed water cooling and forced oil circulation. The main components of the transformer include core, winding, oil tank, oil pillow, breather, explosion-proof pipe (pressure release valve), radiator, insulating bushing, tap changer, gas relay, thermometer, oil purifier, etc.

Between the layers of silicon steel sheets of oil-immersed transformers, oil can penetrate into them due to long-term immersion in the transformer, and the transformer oil is elastic and plays a buffering role, so the noise of oil-immersed transformers is small. However, the voltage regulating switch is inside the fuel tank. When regulating the voltage, the contact of the switch is not visible from the outside. If the contact is not made, it means that the circuit is open. If the contact is poor, the switch will be easily burned when the load is too large.

Operating temperature
Oil-immersed transformers can operate as specified on the nameplate under specified cooling conditions, but the top oil temperature must not exceed 90°C. In order to prevent the aging of the transformer insulation, the top oil temperature should generally not exceed 85°C frequently, and the alarm setting value is set at 80°C.


