The galvanized sheet should be as thick as possible. The general reliability of the galvanized sheet after mechanical shaping and processing (such as arcing) is better than that of a pure flat surface, and it is not easy to deform (for example, the appearance of a car is designed with a curved surface. , can improve impact resistance);

The surface of the galvanized steel sheet should be free of grease or wax as well as other dirt or soot, which can also improve the adhesion of the atomic ash;
In theory, it is not recommended to use decorative paint or primer on a surface that is close to the galvanized steel plate and is too smooth. If necessary, etching treatment (such as hydrochloric acid) should be carried out to increase the bonding strength with putty and paint ;

The putty should be formulated according to the specifications and related to the proportion of curing agent. Excessive proportion will reduce the adhesion and process performance of the putty (for example, it will be too brittle and lose toughness);
The putty should be used within the shelf life and be applied as thinly as possible to prevent the temperature difference between the surface layer and the galvanized steel sheet from being too large and the ground stress to expand and cause the layer to fall off and eventually separate completely.


