Steel plates for automobiles are divided into hot-rolled steel plates, cold-rolled steel plates and coated steel plates according to the production process characteristics; from the strength point of view, they can be divided into: ordinary steel plates (mild steel plates), low-alloy high-strength steel plates (HSLA), ordinary high-strength steel plates (high-strength steel plates) Strength IF steel, BH steel, phosphorus-containing steel and IS steel, etc.) and advanced high-strength steel plates (AHSS), etc.
Among the steel plates classified by strength, the first two types of steel are currently mature in application at home and abroad; the third type of steel has been commercialized in batches internationally, and is also in the process of development, trial use (IS steel) and promotion in China. Stage; the fourth type of steel is in the stage of maturity and promotion and application internationally, and it is in the initial stage of development domestically. Since high-strength steel plates are one of the themes in the development of automotive steel plate materials, the third and fourth types of steel types are highlighted in high-strength steel plates, and coated steel plates are briefly introduced.


High strength steel plate
Ordinary high strength steel plate
High-strength IF steel plate: The steel has high strength while ensuring good plasticity and stamping performance, meeting the performance requirements of complex-shaped car stamping parts.
Bake-hardened steel plate (BH steel): The steel plate has a low yield strength before stamping. The yield strength of the steel plate is increased through the painting and baking process after stamping.
Phosphorus-containing steel plate: Strengthened by the solid solution strengthening effect of phosphorus in steel, it can be used to punch some automotive stamping parts with relatively complex shapes.
Ultra-low carbon phosphorus-containing steel plate: This steel has good deep drawing properties, plasticity and toughness.
Isotropic steel plate (IS steel): mainly used for automobile exterior panels.
Advanced High Strength Steel (AHSS)
Dual-Phase (DP for short) steel: generally used for automotive parts that require high strength, high anti-collision energy absorption and strict forming requirements, such as wheels, bumpers, suspension systems and their reinforcements, etc., with the With the advancement of steel performance and forming technology, DP steel is also used in automobile interior and exterior panels and other parts.
Bainitic steel plate: suitable for stamping automobile support parts, which are thick and require good flanging performance.
Phase transformation induced plasticity (TRIP) steel: especially suitable for situations requiring high bulging.
Complex Phase (CP for short) steel: It has high energy absorption and good hole expansion performance, and is especially suitable for safety parts such as door anti-collision bars, bumpers and B-pillars.
Martensitic steel: It is the steel type with the highest strength among currently commercialized high-strength steel plates. It is mainly used to replace tubular parts such as door anti-collision bars with low molding requirements to reduce manufacturing costs.
Coated steel plate
Performance requirements for coated steel sheets in the automotive industry
In the automobile manufacturing process, coated steel plates must go through stamping, welding, surface treatment, painting, and baking processes. Therefore, the automotive industry has the following performance requirements for coated steel plates:
1) Formability: The substrate meets the molding requirements, and the coating has strong adhesion, resistance to peeling and powdering;
2) Corrosion resistance: Resistant to corrosion caused by road salt in winter, and resistant to atmospheric corrosion in marine climates;
3) Paintability: good phosphating and electrophoretic painting properties;
4) Weldability: little damage to the electrode, wide range of welding parameters;
5) Surface quality: smooth surface and uniform coating thickness;
6) Tolerance size: The plate shape is flat and the tolerance is small.
Main types of coated steel plates for automobiles:
Various types of coated sheets used in automobile bodies mainly include hot-dip galvanized (hot-dip pure zinc GI, alloyed hot-dip galvanized GA, etc.) steel sheets, electroplated zinc (electroplated pure zinc, electroplated zinc-nickel alloy, and alloyed electroplated zinc, etc.) Steel plates and organic and inorganic coated steel plates, etc.
Contact us to learn more!


