Home-Knowledge-

Content

Why choose Galvalume Steel Coil AZ150 AZ50 AZ55?

Sep 16, 2025

Why choose Galvalume Steel Coil AZ150 AZ50 AZ55

 

Popular specifications are in short supply!
click to get the specification sheet!

Since its introduction, hot-dip galvanized steel has been widely used in various industries, including construction and home appliances. As its application continues to expand, the formability and various performance requirements of the steel sheet have continued to improve, leading to the development of galvanized steel, which surpasses hot-dip galvanized steel in some aspects. Galvanized steel is a hot-dip galvanized steel sheet using cold-rolled hardened steel sheets of various strengths and thicknesses as a substrate, coated with an Al-Zn alloy. Galvanized steel is a steel sheet coated with an aluminum-zinc alloy. The alloy is composed of 55% aluminum, 43.4% zinc, and 1.6% silicon, solidified at 600°C. Its overall structure is a dense quaternary crystal structure of aluminum, iron, silicon, and zinc.

 

Product Name

Galvalume Steel Coil

Thickness

0.12mm-6.00mm

Width

600mm-1500mm

Length

1m-12m, Support Customization

Standard

AISI, ASTM, DIN, JIS, GB, JIS, SUS, EN, etc.

Thickness of Aluminum Zinc Coating

30-185g/m²

Content of Al-Zn Coating

Al: 55%, Zn: 43.5%, Si: 1.5%

 

Galvalume Steel Coil AZ150 AZ50 AZ55

 

What are the advantages of plain galvanized steel?

 

1. Corrosion Resistance

Zinc is chemically active. In air at room temperature, it forms a thin, dense layer of basic zinc carbonate on its surface, which prevents further oxidation. Aluminum, on the other hand, forms an insoluble oxide layer in air, acting as a barrier. Tests were conducted on hot-dip galvanized steel and galvanized steel of equivalent thickness, coating, and surface treatment. Galvanized steel exhibits superior corrosion resistance compared to hot-dip galvanized steel, with a service life 2-6 times that of conventional galvanized steel.

2. Heat Resistance

Conventional hot-dip galvanized products typically operate at temperatures below 230°C, and discolor at temperatures above 250°C. However, galvanized steel can withstand long-term use at temperatures up to 315°C without discoloration.

3. Heat Reflectivity

Aluminum-zinc steel reflects heat and light twice as well as galvanized steel, with a reflectivity exceeding 0.70, exceeding the EPA Energy Star rating of 0.65.

4. Mechanical Properties

The mechanical properties of galvanized steel sheets are primarily reflected in yield strength, tensile strength, and elongation. Ordinary DC51D galvanized steel sheets with a 150g/m² coating typically have a yield strength between 140-300 MPa, a tensile strength between 200-330 kg, and an elongation between 13-25 kg. DC51D+AZ galvanized steel sheets with a 150g/m² coating have a yield strength between 230-400 MPa, a tensile strength between 230-550 kg, and an elongation between 15-45 kg.

5. Economical Efficiency

Because the density of 55% Al-Zn is lower than that of Zn, galvanized steel sheets can be used over a 3% larger area than galvanized steel sheets with the same weight and plating thickness.

 

Galvalume Steel Coil AZ150 AZ50 AZ55

SEND INQUIRY

SEND INQUIRY