Home-Knowledge-

Content

What Is Galvanized Steel Plate Made Of? Material & Process Guide

Aug 18, 2025

1. What Is Galvanized Steel Plate Made Of?

Galvanized steel plate is a composite material: a plain carbon steel substrate coated with a protective zinc layer. The substrate may be hot-rolled or cold-rolled steel, chosen by the final application (structural, forming, or general purpose). The zinc coating is applied either by hot-dip galvanizing - passing the strip through molten zinc at about 450°C, which forms a metallurgical zinc-iron alloy bond - or by electrogalvanizing, where zinc is deposited electrolytically from solution onto the steel surface.

Zinc is used because it protects steel two ways: it forms a physical barrier against oxygen and moisture, and it acts as a sacrificial anode - where the coating is scratched or cut, the surrounding zinc corrodes first and keeps the exposed steel from rusting. This dual mechanism is why galvanized steel keeps its strength while resisting corrosion far longer than bare steel.

2. The Two Galvanizing Processes Compared

Aspect Hot-dip galvanizing (HDGI) Electrogalvanizing (EGI)
Coating application Strip immersed in molten zinc (~450°C) Zinc deposited by electrolysis
Typical coating mass Z100 - Z600 g/m² (total both sides); lighter classes by agreement Typically 20 - 100 g/m² total (about 10-50 g/m² per side)
Coating structure Alloy layer + pure zinc; thicker, robust Thin, uniform, smooth
Corrosion life Long (decades in many environments) Shorter - indoor/mild exposure
Formability Good, with coating-adhesion limits at sharp bends Excellent; surface stays smooth after forming
Typical use Roofing, structures, fencing, transport Appliance housings, automotive interiors, precision parts
Standards EN 10346, JIS G3302, ASTM A653, GB/T 2518 EN 10152, JIS G3313, ASTM A591

3. Substrate Grades and Governing Standards

The substrate grade defines the mechanical behavior; the coating class defines corrosion performance. Common combinations:

EN 10346 - DX51D-DX57D (cold forming) and S220GD-S550GD (structural) with Z/ZF/ZA/ZM/AZ/AS coatings.

JIS G3302 - SGCC (commercial), SGCD (drawing), SGCH (structural) with coating classes from Z12 to Z60 (designated in units of 10 g/m²).

ASTM A653 - CS/FS/DDS/EDDS and SS grades with G30-G90 coating designations (oz/ft²).

GB/T 2518 - Chinese hot-dip galvanized sheet standard (grades such as DX51D-Z, S250GD-Z equivalents).

For construction applications, a coating mass of at least 100 g/m² (total both sides) is a common engineering starting point for outdoor exposure; coastal or industrial sites generally require 275 g/m² or more. The exact requirement should be checked against the project specification and the relevant national building code.

4. Performance Advantages

Corrosion resistance: zinc's sacrificial protection covers scratches and cut edges; hot-dip coatings survive harsh outdoor environments for decades when the coating class matches the corrosivity category.

Cost-effectiveness: the galvanizing step adds a moderate premium to the base steel price but multiplies service life several times, cutting maintenance and replacement costs over the asset's lifetime.

Formability and weldability: standard grades pass the bend tests of their governing standard (e.g., DX51D+Z passes 180° bending on 1a diameter per EN 10346 for typical thicknesses); welding is routine with zinc removal at the weld zone and proper fume control.

Paintability and recyclability: with correct surface preparation, galvanized steel is an excellent paint substrate, and both steel and zinc are fully recyclable.

5. How to Specify Galvanized Steel Plate (Buyer's Checklist)

Substrate grade & standard: e.g., DX51D+Z per EN 10346, SGCC per JIS G3302, or CS Type B per ASTM A653.

Coating class: match to environment - indoor: Z100-Z140; rural outdoor: Z180-Z275; coastal/industrial: Z275-Z600.

Surface finish: spangle type (regular/minimized/zero), passivation (chromated or chromium-free), oiled or dry, skin-passed if painting.

Dimensions: thickness, width, length or coil weight, and coil ID for coils.

Certification: mill test certificate (EN 10204 3.1/2.2) with chemistry, mechanical properties and coating-mass results.

Frequently Asked Questions

What is the base material of galvanized steel plate? It is a carbon steel substrate - usually cold-rolled for commercial/formability grades or hot-rolled for structural grades - coated with zinc. The steel provides strength; the zinc provides corrosion protection. Neither element is optional: the grade and the coating are specified independently.

How thick is the zinc coating? Hot-dip coatings are commonly specified as coating mass: e.g., Z100 = 100 g/m² total both sides (about 7 µm per side), Z275 ≈ 19 µm per side. Electro-zinc coatings are typically 10-50 g/m² per side. Coating mass, not coating thickness, is the contractual value.

Which is better - hot-dip or electro-galvanized? It depends on the job. Hot-dip gives far better corrosion resistance and is the standard for outdoor and structural use. Electro-galvanized gives a smoother, more uniform surface with excellent paintability and weldability for appliance and automotive interior parts, but shorter corrosion life. Choose by service environment and processing needs.

Can galvanized plate be welded without removing the coating? Welding is possible, but best practice is to grind the zinc off 20-30 mm around the weld line to avoid porosity and zinc-fume hazards. Weld with adequate ventilation or fume extraction, and touch up the welded area with zinc-rich paint afterward to restore corrosion protection.

Why does my galvanized sheet rust at the edges after cutting? Cut edges expose the steel substrate. Zinc's cathodic protection limits rust creep, but in wet or salty conditions edge rust can still appear. Use heavier coating classes, apply edge sealers or zinc-rich paint on critical cut edges, and design parts to minimize exposed shear edges.

What documents prove the coating meets the order? The mill test certificate records coating-mass test values (triple-spot and single-spot) per the governing standard, plus chemistry and mechanical results. Independent third-party inspection can verify coating mass, thickness and surface quality before shipment if your contract requires it.

SEND INQUIRY

SEND INQUIRY