S250GD Steel
Hot-dip galvanized steel S250GD in accordance with the EN 10346 standard is a high-quality structural steel that has been specially developed for use in the construction industry. With the material number 1.0242, S250GD has a minimum yield strength Rp0.2 of 250 N/mm² and is therefore classified in the medium strength classes of hot-dip galvanized structural steels.
The galvanized coating on S250GD steel greatly enhances its corrosion resistance by forming a protective shield against moisture and environmental factors. This ensures durability and reliability across various applications. We take pride in using advanced surface treatments and coatings that further optimize S250GD's performance, making it the preferred choice for demanding projects across multiple industries.

Importance of Zinc Coating in Corrosion Resistance
The zinc coating provides integral corrosion protection to steel products and extends service life. This treatment acts as a physical barrier and enables some galvanic effect on corrosion due to environmental exposure on steel. Below are some reasons for zinc coating being significant, along with supporting data:
- Barrier Protection
A zinc coating forms an impervious barrier over the steel surface, isolating it from moisture, oxygen, and other corrosion agents. Literature records show that a proper zinc coating can bring down corrosion by up to 90% in usual atmospheres.
- Galvanic Protection
Zinc acts as a sacrificial anode to protect steel. Data shows that this property may extend the life of steel parts by 20-30 years even in the most severe conditions.
- Self-Healing
Zinc protects the coated surface from scratching and abrasion by forming layers of zinc oxide and zinc carbonate. These materials rebuild the galvanized coating naturally as time passes, maintaining it.
- Resistance to Very Harsh Weather Conditions
Zinc coatings provide excellent corrosion resistance in any climate, providing durability from extreme humidity to salinity. The benchmarks indicate that hot-dip galvanizing will give more than 50 years of corrosion protection in rural atmospheres and 20-30 in coastal and industrial atmospheres.
- Cost-Effectiveness
While zinc coating has an upfront cost of application, it is a practical solution in that it reduces further maintenance and replacement costs. Life-cycle analysis points to zinc-coated steel being up to 50 percent cheaper in maintenance costs than uncoated steel over decades of operation.
The benefits above prove that zinc coating is essential in improving steel performance and durability in different industries.
Key Mechanical Properties of S250GD
| Property | Value/Description |
|---|---|
| Yield Strength (MPa) | ≥ 250 |
| Tensile Strength (MPa) | ≥ 330 |
| Elongation (%) | ≥ 19 (varies with thickness) |
| Coating Types | Zinc, Zinc-Iron, Zinc-Aluminum, etc. |
| Corrosion Resistance | High, due to galvanization |
| Ductility | Excellent, suitable for forming |
| Weldability | Good, no preheating required |
| Thickness Range (mm) | 0.30 – 3.00 |
| Applications | Construction, automotive, appliances |
| Standards | EN 10346, EN 10147, EN 10326 |
S250GD | 1.0242: Chemical composition (heat analysis)
| Percentage by weight % max. | ||||
| C | Si | Mn | P | S |
| 0.20 | 0.60 | 1.70 | 0.10 | 0.045 |
- Available Steel Grade
|
Standard |
Grade |
C |
Si |
Mn |
P |
S |
Ti |
|
Forcold Forming Chinese Standard |
DX51D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
DX52D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX53D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX54D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX56D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX57D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
Forcold Forming Japanese Standard |
SGCC |
0.15 |
0.50 |
0.80 |
0.050 |
0.030 |
0.025 |
|
SGCD1 |
0.12 |
0.50 |
0.60 |
0.040 |
0.030 |
0.025 |
|
|
SGCD3 |
0.08 |
0.50 |
0.45 |
0.030 |
0.030 |
0.025 |
|
|
SGCD4 |
0.06 |
0.50 |
0.45 |
0.030 |
0.030 |
0.025 |
|
|
For Structure Japanese Standard |
SGC340 |
0.25 |
0.50 |
1.70 |
0.200 |
0.035 |
0.025 |
|
SGC400 |
0.25 |
0.50 |
1.70 |
0.200 |
0.035 |
0.150 |
|
|
SGC490 |
0.30 |
0.50 |
2.00 |
0.200 |
0.035 |
0.025 |
|
|
SGC510 |
0.30 |
0.50 |
2.50 |
0.200 |
0.035 |
0.025 |
|
|
For Structure AISI Standard |
S220GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
S250GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
|
S280GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
|
S320GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
|
S350GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.150 |
|
|
S550GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.150 |


