S250GD Galvanized Steel
S250GD is available in the following hot dip coatings: S250GD+Z (galvanized), S250GD+ZF (galvanized-iron), S250GD+ZA (galvanized-aluminum), S250GD+AZ (aluminum-zinc), S250GD+AS (galvanized-iron) aluminum silicon).
In addition to carbon, S250GD also contains small amounts of manganese (Mn), silicon (Si), sulfur (S), phosphorus (P), oxygen (O), nitrogen (N) and hydrogen (H), which are produced by It is brought into the ore and smelting process, so it is called impurity element.

Surface treatment processes aim to enhance performance concerning resistance mechanisms against durability, corrosion, and aging of materials. Treatments act on the material surfaces to endure adverse environmental conditions, like moisture, heat, and chemical exposures. Thus, treating surfaces enhances resistance to wear and accelerates cleaning of treated materials, extending their cross-time and making them more reliable for long-term use.
Types of Coating Available
Paint Coatings
Paint coatings remain one of the oldest; sometimes they serve as a protective barrier and beautify the surface. Metals, wood, and concrete are surfaces to which paint coatings are typically applied. With technology at the forefront, there are now environmentally friendly, high-durability paints, such as paints with low VOC (volatile organic compound), which are compatible with the green movement. Globally, the protective coatings market, which includes paint-based protective solutions, is expected to have a CAGR of 5.3 percent from 2023 to 2030.
Powder Coatings
These coatings are extremely tough and environmentally friendly. Defined as free-flowing powders heated to form a hard finish that adequately resists chipping, scratching, and fading, powder coatings are appropriate for appliances, automotive parts, and industrial machinery. The global powder coatings market was valued at $13 billion in 2022 and is expected to grow heavily with recent construction and automotive demand.
Ceramic Coatings
Ceramic coatings resist heat exceptionally well and are used in automotive, aerospace, and industrial applications where surfaces are subjected to high temperatures. They resist corrosion and scratching remarkably well. Research indicates that ceramic coatings increase thermal efficiency and wear negligibly for five years, minimizing maintenance for demanding environments.
Epoxy Coatings
Epoxy coatings are employed for flooring in industries, pipelines, and marine environments. They are strong adhesives that resist chemicals and abrasions. Epoxy coatings also exhibit water resistance, making them more suitable for relatively high moisture-exposed environments. Market analysts forecast that the epoxy coating segment will experience significant growth with infrastructure projects and increased industrial output.
PTFE (Teflon) Coatings
PTFE, commonly called Teflon, is a specialist non-stick coating used for cookware, machinery, and electronics. It is very resistant to heat (to 500°F), chemicals, and friction. Key industry insights report that the demand for PTFE coatings is increasing steadily due to the coating's versatility and longevity in industrial applications.
Metallic Coatings
Metallic coatings, like galvanization or anodization, improve corrosion resistance and increase hardness at the surface levels. They are used extensively in architectural structures, automotive parts, and electronics. Zinc-based metallic coatings are highly popular for maintaining structural integrity under outdoor conditions subjected to harsh elements. Industry data suggest that metallic coatings represent a major share in protective coatings, with the uptake rising in renewable energy structures such as wind turbines.
Polyurethane Coatings
Polyurethane coatings are flexible, with good abrasion resistance, gloss retention, and weather durability. They're found in the transportation, construction, and energy industries. Waterborne polyurethane coatings have recently emerged as environmentally friendly due to a reduction in VOC emissions.
The coating industry is still an important field of material protection, purely because it is an innovation in technology directed toward fulfilling specific environmental and functional requirements. The adoption of advanced coatings continues to rise worldwide due to eco-regulations, industry growth, and cutting-edge technology toward more sustainable and long-lasting solutions.
S250GD Galvanized Steel Applications
Our S250GD galvanized steel products are used in a wide range of applications due to their strength, corrosion resistance and good processability, mainly including:
Construction: structures such as roofs, wall panels, garage doors, etc., to ensure the durability and beauty of the building.
Automobile manufacturing: body panels, chassis and other parts, providing corrosion and impact protection.
Household appliances: refrigerators, washing machines and other shells, rust prevention and extended service life.
Industrial equipment: ventilation ducts, storage tanks, etc., suitable for high humidity or corrosive environments.
Electrical equipment and hardware: junction boxes, decorative parts, etc., beautiful appearance, corrosion resistance and durability.
Agricultural equipment: greenhouse structures, agricultural machinery, etc., strong weather resistance, suitable for outdoor applications.

Properties according to DIN EN 10 346
Steel type
| Short designation | Surface finish | Material number |
| S250GD | +Z,+ZF,+ZA,+ZM,+AZ,+AS | 1.0242 |
S250GD | 1.0242: Mechanical properties (longitudinal)
| Proof stress Rp0,21) MPa min. | Tensile strength Rm2) MPa min. |
Elongation at fracture A803) % min. |
| 250 | 330 | 19 |
S250GD | 1.0242: Chemical composition (heat analysis)
| Percentage by weight % max. | ||||
| C | Si | Mn | P | S |
| 0.20 | 0.60 | 1.70 | 0.10 | 0.045 |
- Available Steel Grade
|
Standard |
Grade |
C |
Si |
Mn |
P |
S |
Ti |
|
Forcold Forming Chinese Standard |
DX51D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
DX52D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX53D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX54D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX56D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX57D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
Forcold Forming Japanese Standard |
SGCC |
0.15 |
0.50 |
0.80 |
0.050 |
0.030 |
0.025 |
|
SGCD1 |
0.12 |
0.50 |
0.60 |
0.040 |
0.030 |
0.025 |
|
|
SGCD3 |
0.08 |
0.50 |
0.45 |
0.030 |
0.030 |
0.025 |
|
|
SGCD4 |
0.06 |
0.50 |
0.45 |
0.030 |
0.030 |
0.025 |
|
|
For Structure Japanese Standard |
SGC340 |
0.25 |
0.50 |
1.70 |
0.200 |
0.035 |
0.025 |
|
SGC400 |
0.25 |
0.50 |
1.70 |
0.200 |
0.035 |
0.150 |
|
|
SGC490 |
0.30 |
0.50 |
2.00 |
0.200 |
0.035 |
0.025 |
|
|
SGC510 |
0.30 |
0.50 |
2.50 |
0.200 |
0.035 |
0.025 |
|
|
For Structure AISI Standard |
S220GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
S250GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
|
S280GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
|
S320GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
|
S350GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.150 |
|
|
S550GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.150 |


