Home-Knowledge-

Content

What is the difference between Q235 steel and DX51D steel?

Nov 01, 2023

DC51D-Z(2).pdf

The material of DX51D is galvanized sheet, which is the German standard. GNEE steel,Shougang, Baosteel, etc. generally use this standard to name the material of galvanized sheets.

 

The material Q235B is available for hot plates and cold plates, and galvanized steel strips are also made of this material. It is the national standard.

SGCC: Identification of Japanese steel plate grades: SGCC, HOT-DIP GALVANIZED STEEL is hot-dip galvanized steel.


Generally thin galvanized sheets

DX51D: DX51D is a bending and forming grade galvanized sheet with a steel grade serial number of 51 and low carbon steel as the base material.
Steel grade serial numbers 52-56 are steel plates or steel strips for stamping.

 

The main chemical composition of DX51D is as follows:
C%≤0.07, Si%≤0.03, Mn%≤0.50, P%≤0.025, S%≤0.025, Alt%≥0.020

dx51d q235

Q235 Ordinary Carbon Structural Steel-Plain Plate
Q represents the yield value of this material, and the following 235 refers to the yield value of this material, which is around 235MP. And as the thickness of the material increases, its yield value decreases. Due to its moderate carbon content and good overall performance, strength, plasticity and welding properties are well matched, and it has the most extensive uses. It is often rolled into wire rods or round steel, square steel, flat steel, angle steel, I-beam, channel steel, window frame steel and other sections, medium and thick steel plates. It is widely used in construction and engineering structures. It is used to make steel bars or construct factory building frames, high-voltage transmission towers, bridges, vehicles, boilers, containers, ships, etc. It is also widely used in mechanical parts that do not have high performance requirements. C and D grade steel can also be used as some professional steel.


Chemical composition of various grades of Q235: Low alloy plate


Q235 is divided into four levels: A, B, C and D (GB/T 700-2006)
Q235A grade contains C ≤0.22% Mn ≤1.4% Si ≤0.35% S ≤0.050 P ≤0.045
Q235B grade contains C ≤0.20% Mn ≤1.4% Si ≤0.35% S ≤0.045 P ≤0.045
Q235C grade contains C ≤0.17% Mn ≤1.4% Si ≤0.35% S ≤0.040 P ≤0.040
Q235D grade contains C ≤0.17% Mn ≤1.4% Si ≤0.35% S ≤0.035 P ≤0.035

SEND INQUIRY

SEND INQUIRY