Cold-rolled steels
Cold-rolled deep-drawing steels continue to play an irreplaceable role in automotive, appliance manufacturing, and precision stamping industries. Among the most widely used grades, DC04 and DC05 (EN 10130 standard) offer excellent formability and surface quality. However, the two materials exhibit different performance levels and are suitable for different types of deep-drawing operations. Understanding their differences helps manufacturers select the most cost-effective material based on product requirements.
1. Cost vs. Performance Map
| Feature | DC04 | DC05 |
|---|---|---|
| Material Cost | ★★★☆☆ | ★★★★☆ (Higher) |
| Formability | ★★★★☆ | ★★★★★ |
| Stamping Scrap Risk | Medium | Very Low |
| Mold Wear | Normal | Low |
| Recommended Production Volume | Medium / High | High-volume / automated production |
2. Common Customer-Reported Issues Solved by Each Grade
| Pain Point | Solution | Recommended Grade |
|---|---|---|
| Cracking during final forming | Higher elongation | DC05 |
| Wrinkling in flanges | Lower yield strength | DC05 |
| Cost control + stable quality | Balanced strength & ductility | DC04 |
| Complicated product geometry | Superior strain distribution | DC05 |
| Surface requirement for painting or coating | High-quality skin-pass finish | Both (FC / FD) |
3. Real Manufacturing Impact
| Requirement Level | Best Choice |
|---|---|
| Normal forming → no extreme stretch | DC04 |
| Severe forming → deep / reverse drawing | DC05 |
| Dimensional accuracy during high-speed stamping | DC05 |
| General household hardware & consumer products | DC04 |
| Premium appliances and automotive interior parts | DC05 |
4. Application Industry Matrix
| Industry | DC04 | DC05 |
|---|---|---|
| Automotive body parts | ✓ | ✓✓ |
| Air-conditioning and home appliances | ✓ | ✓✓ |
| Office equipment and metal furniture | ✓✓ | – |
| EV battery housings / hybrid parts | – | ✓✓ |
| Precision stamped components | – | ✓✓ |
If your priority is cost control with consistent performance, select DC04.
If your priority is high yield rate + zero tolerance for defects, select DC05.
For parts with multiple forming steps, DC05 is strongly recommended.
GNEE STEEL helps customers evaluate drawability level, mold structure, thickness tolerance, mechanical property requirements, and recommends the best grade based on actual drawings and forming difficulty - ensuring better productivity, fewer rejections, and lower total costs.



