Cold-rolled steels
Cold-rolled deep-drawing steels continue to play an irreplaceable role in automotive, appliance manufacturing, and precision stamping industries. Among the most widely used grades, DC04 and DC05 (EN 10130 standard) offer excellent formability and surface quality. However, the two materials exhibit different performance levels and are suitable for different types of deep-drawing operations. Understanding their differences helps manufacturers select the most cost-effective material based on product requirements.
1. Chemical Composition Comparison
| Element | DC04 (%) | DC05 (%) |
|---|---|---|
| Carbon (C) | ≤ 0.08 | ≤ 0.06 |
| Manganese (Mn) | ≤ 0.40 | ≤ 0.35 |
| Phosphorus (P) | ≤ 0.025 | ≤ 0.020 |
| Sulfur (S) | ≤ 0.020 | ≤ 0.020 |
DC05 contains lower carbon and manganese, allowing a softer microstructure and greater elongation during deep drawing compared with DC04.
2. Heat Treatment & Metallurgical Condition
| Steel Grade | Delivery Condition | Heat Treatment Characteristics |
|---|---|---|
| DC04 | Cold-rolled / annealed | Suitable for standard deep drawing |
| DC05 | Cold-rolled / annealed | Suitable for extra-deep drawing, complex deformation |
DC05 undergoes stricter annealing control to ensure high ductility and lower strain aging, making it ideal for high-difficulty stamped shapes.
3. Mechanical Property Comparison
| Property | DC04 | DC05 |
|---|---|---|
| Yield Strength (MPa) | 140 – 260 | 120 – 210 |
| Tensile Strength (MPa) | 270 – 370 | 260 – 350 |
| Elongation (%) | ≥ 34 | ≥ 38 |
| Forming Level | Deep Drawing | Extra Deep Drawing |
4. Application Recommendations
| Use Case | Recommended Grade |
|---|---|
| Standard auto stamping | DC04 |
| Complex deep drawing stamping | DC05 |
| Appliance side panels / shells | DC04 |
| Refrigerator / washing machine inner drum | DC05 |
| Furniture hardware | DC04 |
| Precision stamped small parts | DC05 |
FAQ
1. Can cold-rolled steel be used for deep drawing?
Yes, but the appropriate grade must be selected.
For example: DC01 is suitable for general forming, DC03 for medium forming, and DC04/05/06 for deep drawing and ultra-deep drawing.
2. What is the standard thickness range for cold-rolled steel?
Standard thickness is 0.25–3.0 mm, and width is 600–2000 mm (customizable depending on the supplier).
3. What surface treatments are available for cold-rolled steel?
Common surface finishes include: bright, matte, oiled, and dry. The choice depends on processing or rust prevention requirements.
4. Does cold-rolled steel rust?
Yes. Although the surface is smooth, it can still oxidize if not galvanized or coated. Therefore, moisture protection, oiling, or proper packaging is necessary during transportation or storage.
GNEE STEEL also produces other cold-rolled steel grades. If you have any needs for cold-rolled steel plates, cold-rolled steel coils, galvanized steel plates, or galvanized steel coils, please contact us. We will provide you with the latest quotation!



