Home-Knowledge-

Content

The development history of high-strength steel for automobiles

Feb 19, 2024

Today I would like to talk to you about the development history of Q&P quenching and partitioned high-strength steel, which is the representative of the third generation of high-strength steel for automobiles.

DP Steel

 

Development of D&P Steel

In 2003, Speer et al. in the United States, after quenching the medium carbon high silicon steel 0.35C-1.35Mn-0.74Si, controlled the end temperature of rapid cooling between Ms and Mf, and then quickly heated it to near the Ms point for tempering, so that the carbon was The austenite is distributed to the retained austenite to stabilize the retained austenite and improve the plasticity and toughness of the steel. This kind of steel containing retained austenite structure and strengthened by martensite phase is named Q&P steel. Since then, workers at home and abroad have carried out relevant research:

 D&P Steel

The research team of Dr. Branagan[14] of the American Nanosteel Company developed Heterogeneous Nano-Structured Steels, and jointly conducted industrial production trials with AK Company using the Q&P process on the CSP production line. High plasticity steel NXG1200 was released. This steel type has an extremely low yield-strength ratio, with a yield strength of only 378MPa, but a tensile strength of 1188MPa. The ductility is extremely high, the uniform elongation EU value reaches 51.5%, the total elongation EL reaches 54.6%, and the hole expansion rate reaches 45%, showing extremely high plasticity and formability. The relevant technical indicators are equivalent to 304 stainless steel. AK Company further optimized the process based on NXG1200 and developed a high-plasticity, high-strength cold-rolled and galvanized automotive sheet with an elongation of 12%-15%, which is used for stamping automotive B-pillars and other components. Due to the successful development of NXG1200, steel companies in Europe and Japan have also developed third-generation AHSS with different process characteristics and implemented batch applications. For example, the 1000-1200MPa high-strength and high-plasticity steel plates developed by ArcelorMittal, Kobe Steel and other companies have also been successfully used in well-known automobile factories such as Foton Motor.

 

Among them, Kobe Steel developed TBF steel [16]. This is the TRIP steel with improved technology. The structure of this steel is ferrite + carbide-free bainite. The carbide-free bainite structure is characterized by thin films of retained austenite flakes between the bainite flakes. These structures of TBF steel already have the structural characteristics of the third generation automotive steel M3 structure. The ferrite+bainite+retained austenite structure is a multi-phase structural characteristic. The size of ferrite is generally about 10 μm, the thickness of bainite strips is generally about 2 μm, and the thickness of thin film retained austenite is generally about 1 μm. The size of the multiphase structure differs by an order of magnitude and is multi-scale. organizational characteristics. Retained austenite belongs to the metastable phase structure and is the structural characteristic of the metastable phase. The structure of TBF steel has met the organizational requirements of the third generation of automotive steel. Because steel contains ferrite and retained austenite, the plasticity of steel is high. This is because the ferrite plays a role in coordinating deformation and improving the plasticity. Retained austenite is a metastable phase structure. When subjected to external forces at room temperature, martensitic transformation occurs, which plays a role in phase transformation-induced plasticity. Therefore, the plasticity of steel is high. The TBF steel initially developed by Kobe Steel has a tensile strength of 1330MPa and a plastic elongation of more than 15%. The mechanical properties show the characteristics of high strength and high plasticity.

 

ArcelorMittal[17] has developed Fortiform advanced high-strength steel, which further achieves material lightweighting on the basis of lightweight automotive structures. Currently known advanced high-strength steel grades include Fortiform 980, Fortiform 1050 and Fortiform 1180. With reasonable material selection and reasonable structural lightweight, these advanced high-strength steels can further reduce the weight of the body-in-white by 20%. Domestic research has never stopped. Baosteel has realized the industrial production of Q&P steel for the first time in the world. The developed QP980 has a strong plastic area of more than 20GPa%. The tensile strength of this steel type has reached more than 1000MPa and the elongation has reached more than 20%. It is known as It is widely used in the production of more complex auto parts. Based on the successful development of QP980, Baosteel further developed QP1180, which has an elongation of ≥10% when the tensile strength reaches more than 1180MPa, thus forming a series of third-generation automotive steel products.

 

Based on the successful experience of domestic Baosteel, Anshan Iron and Steel has also successively launched QP980. Shougang combined its own equipment conditions and optimized the composition of Q&P steel to develop the DH steel series. When the tensile strength reaches 1000MPa, the elongation reaches a level of ≥15%. Although the elongation is slightly lower, Shougang's high-strength and high-plasticity steel solution is more suitable for ordinary continuous annealing lines and is more conducive to the high-strength and high-plasticity process. Industrial promotion of third-generation automotive steel products. Due to the continuous exploration and research of many domestic enterprises, the structure of domestic automobile steel varieties has been enriched and optimized, which provides the automobile industry with a richer material selection. Many well-known domestic automobile manufacturers have taken the lead in adopting it in the parts design process. Q&P steel has made domestic automobile body manufacturing levels at the forefront of the world. The above examples all prove that the research and development of third-generation high-strength steel is very necessary, and related research will continue, and the understanding of the mechanism of advanced high-strength steel will be continuously improved to guide production and application in the automotive industry.

SEND INQUIRY

SEND INQUIRY