Home-Knowledge-

Content

SPCC vs SPCE Cold Rolled Steel Plate – Key Differences, Applications, and Material Properties

Oct 22, 2025

SPCC vs SPCE Cold Rolled Steel Plate

 

Popular specifications are in short supply!
click to get the specification sheet!

SPCC, SPCD, and SPCE are cold-rolled steel sheet grades under the JIS G 3141 standard, representing different stamping formability levels. Among them, SPCC (Commercial Quality) and SPCE (Deep Drawing Quality) differ significantly in composition, mechanical properties, and applications. Below is a detailed comparison:

  • Standard and Definition
Grade Standard Definition
SPCC JIS G 3141 Commercial Cold Rolled Carbon Steel Sheet
SPCE JIS G 3141 Deep Drawing Quality Cold Rolled Carbon Steel Sheet
  • Key Difference:

SPCC is suitable for general processing such as ordinary stamping and bending.

SPCE is suitable for high-difficulty deep drawing operations, offering optimal ductility and is ideal for complex curved components.

  • Chemical Composition Comparison
Element SPCC (%) SPCE (%)
C (Carbon) ≤0.12 ≤0.08
Mn (Manganese) ≤0.50 ≤0.40
P (Phosphorus) ≤0.035 ≤0.025
S (Sulfur) ≤0.025 ≤0.020
  • Key Differences:

SPCE has lower carbon content (≤0.08%), reducing work hardening and improving plasticity.

SPCE has stricter limits on phosphorus and sulfur content, reducing the risk of stamping cracks.

 

SPCC Vs SPCE Cold Rolled Steel Plate

  • Mechanical Properties Comparison
Property SPCC SPCE
Tensile Strength (MPa) 270~410 260~370
Yield Strength (MPa) ≥140 ≥120
Elongation (%) ≥30 ≥36
  • Key Differences:

SPCE has lower strength and higher elongation, indicating excellent plasticity suitable for deep drawing.

SPCC has slightly higher strength but poorer formability compared to SPCE, making it prone to cracking during complex stamping.

  • Main Applications Comparison
Grade Suitable Processing Methods Typical Applications
SPCC General stamping, bending, shearing Appliance housings, hardware parts, general structural components
SPCE Difficult deep drawing, complex forming Automotive fuel tanks, precision stamped parts, complex curved components
  • Examples:

SPCC is suitable for filing cabinets, simple brackets, distribution boxes, etc.

SPCE is suitable for automotive fuel tanks, washing machine inner drums, high-precision stamped parts.

  • Price and Market Availability

SPCC is the most common, has the lowest price, and is readily available in the market.

SPCE, due to stricter composition controls, is higher in price and typically used in high-end manufacturing (e.g., automotive, precision stamping).

 

 

How to Choose?

 

Selection Criterion SPCC SPCE
Forming Difficulty Simple stamping, bending Deep drawing, complex forming
Material Cost Low High
Industry Application Appliances, hardware Automotive, precision manufacturing
  • Applicable Scenario Summary:

Choose SPCC: For ordinary stamped parts, cost-sensitive applications, no complex deformation requirements.

Choose SPCE: For high-precision deep-drawn parts (e.g., automotive panels, fuel tanks) requiring high material ductility.

 

Summary (SPCC vs SPCE vs SPCD)

 

Grade Stamping Grade Ductility Typical Applications
SPCC Commercial Moderate Appliance housings, simple structural parts
SPCD Drawing Good Medium-difficulty stamped parts
SPCE Deep Drawing Excellent Automotive fuel tanks, high-precision complex parts

About Us

 

We are mainly engaged in steel export trade of the following steel products:HRC/HRS,CRC/CRS,GI,GL,PPGI,PPGL,ROOFING SHEETS,TINPLATE,TFS,STEEL PIPES/TUBES,WIRE RODS,REBAR,ROUND BAR,BEAM AND CHANNEL,FLAT BAR ETC. Our Products are widely used in: hardware, machinery, electrical appliances, vehicle parts, construction and other industries.

 

GNEE Steel Group has always followed international trade practices, adhering to the business philosophy of abiding by contracts, keeping promises, quality service, and mutual benefit. We are willing to sincerely cooperate with friends at home and abroad to develop together.

SPCC Vs SPCE Cold Rolled Steel Plate

SEND INQUIRY

SEND INQUIRY