S350GD Galvanized Steel
S350GD+Z275 is a common steel grade that refers to a hot-dip galvanized structural steel with a minimum yield strength of 350 MPa and a zinc coating of 275 grams per square meter. This steel is used in many applications where high strength and excellent corrosion protection are required, such as automotive parts, building structures, roofing materials, etc.

S350GD Galvanized Steel
- S350GD
S stands for Structural Steel. 350 indicates the minimum yield of the steel.
350 means that the steel has a minimum yield strength of 350 MPa (megapascals, megabulls per square millimeter), which is the maximum stress that the steel can withstand before deformation.
GD means that the steel is Galvanized Steel, i.e. the surface of the steel has been hot-dip galvanized to improve its corrosion resistance.
- Z275
Z denotes that the steel is galvanized. 275 denotes a mass of 275 grams of zinc per square metre of steel surface, which means that 275 grams of zinc per square metre of steel plate are coated to provide better corrosion protection.
Alternative Names, Standards, and Equivalents
| Standard Organization | Designation/Grade | Country/Region of Origin | Notes/Remarks |
|---|---|---|---|
| UNS | S350GD | International | Closest equivalent to EN 10346 |
| EN | S350GD | Europe | Commonly used in automotive applications |
| ASTM | A653 | USA | Similar properties but different coating specifications |
| JIS | G3302 | Japan | Minor compositional differences to be aware of |
The table above highlights the various standards and equivalents for S350GD steel. While these grades may be considered equivalent, subtle differences in composition and coating processes can affect their performance in specific applications. For instance, ASTM A653 may have different coating thickness requirements, which can influence corrosion resistance.
Specifications Table
| Quality | Standard | Material No. | Available coatings |
|---|---|---|---|
| S350GD | DIN EN 10346 | 1.0529 | +Z, +ZF, +ZA, +ZM, +AZ, +AS |
| Testing direction | Yield strengthRP02 (MPa) |
Tensil Strength Rm (MPa) |
Elongation A80 (in %) |
|---|---|---|---|
| L | ≥ 350 | ≥ 420 | ≥ 16 |
| C % |
Si % |
Mn % |
P % |
S % |
|---|---|---|---|---|
| ≤ 0,20 | ≤ 0,60 | ≤ 1,70 | ≤ 0,10 | ≤ 0,045 |
Unlike ordinary galvanized steel, the precise matching of yield strength and coating thickness in S350GD galvanized steel ensures stable performance in high wind pressure and high corrosion environments. If you are facing material selection confusion or need to compare performance differences between different grades of galvanized steel, please feel free to contact us for one-on-one consulting services at any time.
- Available Steel Grade
|
Standard |
Grade |
C |
Si |
Mn |
P |
S |
Ti |
|
Forcold Forming Chinese Standard |
DX51D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
DX52D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX53D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX54D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX56D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX57D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
Forcold Forming Japanese Standard |
SGCC |
0.15 |
0.50 |
0.80 |
0.050 |
0.030 |
0.025 |
|
SGCD1 |
0.12 |
0.50 |
0.60 |
0.040 |
0.030 |
0.025 |
|
|
SGCD3 |
0.08 |
0.50 |
0.45 |
0.030 |
0.030 |
0.025 |
|
|
SGCD4 |
0.06 |
0.50 |
0.45 |
0.030 |
0.030 |
0.025 |
|
|
For Structure Japanese Standard |
SGC340 |
0.25 |
0.50 |
1.70 |
0.200 |
0.035 |
0.025 |
|
SGC400 |
0.25 |
0.50 |
1.70 |
0.200 |
0.035 |
0.150 |
|
|
SGC490 |
0.30 |
0.50 |
2.00 |
0.200 |
0.035 |
0.025 |
|
|
SGC510 |
0.30 |
0.50 |
2.50 |
0.200 |
0.035 |
0.025 |
|
|
For Structure AISI Standard |
S220GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
S250GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
|
S280GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
|
S320GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
|
S350GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.150 |
|
|
S550GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.150 |


