S350GD Structural steel
S350GD steel is classified as a low-carbon steel, notable for its excellent balance of strength, ductility, and corrosion resistance. The primary alloying element is zinc, which is applied through a hot-dip galvanization process, providing a protective layer that significantly enhances the steel's durability in corrosive environments. The carbon content is typically low, which contributes to its good weldability and formability.
- Key Characteristics:
- High Strength: S350GD exhibits a minimum yield strength of 350 MPa, making it suitable for structural applications.
- Good Ductility: The low carbon content allows for significant deformation without fracture.
- Corrosion Resistance: The zinc coating provides excellent protection against rust and corrosion, extending the lifespan of components made from this steel.
- Advantages:
- Cost-Effective: The galvanization process is economical, providing long-lasting protection without the need for additional coatings.
- Versatile Applications: Suitable for various applications, including automotive parts, building components, and appliances.

S350GD Structural steel
Properties according to DIN EN 10 346
| Short designation | Surface finish | Material number |
| S350GD | +Z,+ZF,+ZA,+ZM,+AZ,+AS | 1.0529 |
S350GD | 1.0529: Mechanical properties
| Proof stress Rp0,21) MPa min. | Tensile strength Rm2) MPa min. |
Elongation at fracture A803) % min. |
| 350 | 420 | 16 |
S350GD | 1.0529: Chemical composition
| Percentage by weight % max. | ||||
| C | Si | Mn | P | S |
| 0.20 | 0.60 | 1.70 | 0.10 | 0.045 |
Alternative Names, Standards, and Equivalents
| Standard Organization | Designation/Grade | Country/Region of Origin | Notes/Remarks |
|---|---|---|---|
| UNS | S350GD | International | Closest equivalent to EN 10346 |
| EN | S350GD | Europe | Commonly used in automotive applications |
| ASTM | A653 | USA | Similar properties but different coating specifications |
| JIS | G3302 | Japan | Minor compositional differences to be aware of |
The table above highlights the various standards and equivalents for S350GD steel. While these grades may be considered equivalent, subtle differences in composition and coating processes can affect their performance in specific applications. For instance, ASTM A653 may have different coating thickness requirements, which can influence corrosion resistance.
With the upgrading of global infrastructure demand, the market application scenarios of S350GD galvanized steel continue to expand. We not only provide high-quality materials that meet international standards, but also offer a full-chain solution from material selection to processing. Contact us now and let S350GD galvanized steel be a solid partner for your project's success.
- Available Steel Grade
|
Standard |
Grade |
C |
Si |
Mn |
P |
S |
Ti |
|
Forcold Forming Chinese Standard |
DX51D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
DX52D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX53D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX54D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX56D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX57D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
Forcold Forming Japanese Standard |
SGCC |
0.15 |
0.50 |
0.80 |
0.050 |
0.030 |
0.025 |
|
SGCD1 |
0.12 |
0.50 |
0.60 |
0.040 |
0.030 |
0.025 |
|
|
SGCD3 |
0.08 |
0.50 |
0.45 |
0.030 |
0.030 |
0.025 |
|
|
SGCD4 |
0.06 |
0.50 |
0.45 |
0.030 |
0.030 |
0.025 |
|
|
For Structure Japanese Standard |
SGC340 |
0.25 |
0.50 |
1.70 |
0.200 |
0.035 |
0.025 |
|
SGC400 |
0.25 |
0.50 |
1.70 |
0.200 |
0.035 |
0.150 |
|
|
SGC490 |
0.30 |
0.50 |
2.00 |
0.200 |
0.035 |
0.025 |
|
|
SGC510 |
0.30 |
0.50 |
2.50 |
0.200 |
0.035 |
0.025 |
|
|
For Structure AISI Standard |
S220GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
S250GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
|
S280GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
|
S320GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
|
S350GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.150 |
|
|
S550GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.150 |


