Hot-dip Galvanized Structural Steel
S350GD steel is a hot-dip galvanized steel grade primarily used in the automotive and construction industries. It falls under the category of low-carbon steel, specifically designed for applications requiring good formability and corrosion resistance. The primary alloying elements in S350GD include iron (Fe), carbon (C), and zinc (Zn), with zinc being crucial for its galvanization process, which enhances its corrosion resistance.
S350GD steel is classified as a low-carbon steel, notable for its excellent balance of strength, ductility, and corrosion resistance. The primary alloying element is zinc, which is applied through a hot-dip galvanization process, providing a protective layer that significantly enhances the steel's durability in corrosive environments. The carbon content is typically low, which contributes to its good weldability and formability.

S350GD Steel
Mechanical Properties
| Property | Condition/Temper | Typical Value/Range (Metric) | Typical Value/Range (Imperial) | Reference Standard for Test Method |
|---|---|---|---|---|
| Yield Strength (0.2% offset) | Hot-Dip Galvanized | 350 MPa | 50.8 ksi | ASTM E8 |
| Tensile Strength | Hot-Dip Galvanized | 450 MPa | 65.3 ksi | ASTM E8 |
| Elongation | Hot-Dip Galvanized | 22% | 22% | ASTM E8 |
| Hardness (Brinell) | Hot-Dip Galvanized | 120 HB | 120 HB | ASTM E10 |
| Impact Strength | - | 27 J (at -20°C) | 20 ft-lbf (at -4°F) | ASTM E23 |
The mechanical properties of S350GD steel make it suitable for structural applications where strength and ductility are critical. Its yield strength of 350 MPa ensures it can withstand significant loads, while its elongation percentage indicates good formability.
Alternative Names, Standards, and Equivalents
| Standard Organization | Designation/Grade | Country/Region of Origin | Notes/Remarks |
|---|---|---|---|
| UNS | S350GD | International | Closest equivalent to EN 10346 |
| EN | S350GD | Europe | Commonly used in automotive applications |
| ASTM | A653 | USA | Similar properties but different coating specifications |
| JIS | G3302 | Japan | Minor compositional differences to be aware of |
The table above highlights the various standards and equivalents for S350GD steel. While these grades may be considered equivalent, subtle differences in composition and coating processes can affect their performance in specific applications. For instance, ASTM A653 may have different coating thickness requirements, which can influence corrosion resistance.
Properties
S350GD combines high strength with excellent ductility and long-lasting corrosion protection. The most important key mechanical values can be found in the table above.
These characteristic values enable reliable load-bearing capacity even under dynamic or impact loads. The hot-dip galvanized surface (+Z) offers solid basic corrosion protection. Due to the variants
+Z (pure galvanized):
Standard corrosion protection for general conditions.
+ZF (zinc-iron):
Improved coating adhesion and increased resistance to mechanical stress.
+ZA (zinc-aluminium):
Optimized resistance in atmospheric environments.
+ZM (zinc-magnesium):
Extended protection in maritime and saline zones through passivating behavior.
+AZ (aluminum-zinc):
Combination of heat resistance and corrosion protection, ideal for high surface temperatures.
+AS (aluminum-silicon):
Especially for applications with extreme temperature influences and high corrosion loads.
- Available Steel Grade:
|
Standard |
Grade |
C |
Si |
Mn |
P |
S |
Ti |
|
Forcold Forming Chinese Standard |
DX51D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
DX52D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX53D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX54D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX56D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX57D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
Forcold Forming Japanese Standard |
SGCC |
0.15 |
0.50 |
0.80 |
0.050 |
0.030 |
0.025 |
|
SGCD1 |
0.12 |
0.50 |
0.60 |
0.040 |
0.030 |
0.025 |
|
|
SGCD3 |
0.08 |
0.50 |
0.45 |
0.030 |
0.030 |
0.025 |
|
|
SGCD4 |
0.06 |
0.50 |
0.45 |
0.030 |
0.030 |
0.025 |
|
|
For Structure Japanese Standard |
SGC340 |
0.25 |
0.50 |
1.70 |
0.200 |
0.035 |
0.025 |
|
SGC400 |
0.25 |
0.50 |
1.70 |
0.200 |
0.035 |
0.150 |
|
|
SGC490 |
0.30 |
0.50 |
2.00 |
0.200 |
0.035 |
0.025 |
|
|
SGC510 |
0.30 |
0.50 |
2.50 |
0.200 |
0.035 |
0.025 |
|
|
For Structure AISI Standard |
S220GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
S250GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
|
S280GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
|
S320GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
|
S350GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.150 |
|
|
S550GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.150 |
Unlike ordinary galvanized steel, the precise matching of yield strength and coating thickness in S350GD galvanized steel ensures stable performance in high wind pressure and high corrosion environments. If you are facing material selection confusion or need to compare performance differences between different grades of galvanized steel, please feel free to contact us for one-on-one consulting services at any time.


