Home-Knowledge-

Content

Properties of hot-dip galvanized steel S350GD

Jan 26, 2026

S350GD galvanized steel

 

S350GD galvanized steel sheet/plate is low-alloy high-strength steel coated with a zinc layer for better corrosion resistance. It's particularly suited for harsh environments, like marine climates, where corrosion can be a bigger issue. With a yield strength of at least 350 MPa, commonly used in industries like construction, automotive, and home appliances, for things like roofs, car bodies, and appliance exteriors.

 

The steel is made up of elements like iron, carbon, manganese, and silicon. This combination gives it the strength you need, while still making it easy to work with and resistant to corrosion.

 

The thickness of the zinc coating can be adjusted depending on what it's being used for, improving corrosion resistance and adaptability. It's also easy to process, whether you're stamping, bending, or welding, so it works well for both cold-formed and hot-formed products.

 

S350GD Galvanized Steel

S350GD galvanized steel

 

Properties

 

S350GD combines high strength with excellent ductility and long-lasting corrosion protection. The most important key mechanical values can be found in the table above.

These characteristic values enable reliable load-bearing capacity even under dynamic or impact loads. The hot-dip galvanized surface (+Z) offers solid basic corrosion protection. Due to the variants

+Z (pure galvanized):
Standard corrosion protection for general conditions.

+ZF (zinc-iron):
Improved coating adhesion and increased resistance to mechanical stress.

+ZA (zinc-aluminium):
Optimized resistance in atmospheric environments.

+ZM (zinc-magnesium):
Extended protection in maritime and saline zones through passivating behavior.

+AZ (aluminum-zinc):
Combination of heat resistance and corrosion protection, ideal for high surface temperatures.

+AS (aluminum-silicon):
Especially for applications with extreme temperature influences and high corrosion loads.

 

Material Specifications

 

Chemical Composition

 

Grade C Si Mn P S
           
S350GD ≤0.2 ≤0.6 ≤1.7 ≤0.1 ≤0.045

*According to EN 10346-2015.

 

Grade Tensile Strength (σb, MPa) Yield Strength (σs, MPa) Elongation (δ, %)
S350GD+Z ≥420 ≥350 A80: ≥16
S350GD+ZF
S350GD+ZA
S350GD+ZM
S350GD+AZ
S350GD+AS

*According to EN 10346-2015.

 

*The following minimum elongation values apply for different thicknesses:

0.5mm < t ≤ 0.7mm: minimum elongation is reduced by 2% from the values in the table.

0.35mm < t ≤ 0.5mm: minimum elongation is reduced by 4% from the values in the table.

t ≤ 0.35mm: minimum elongation is reduced by 7% from the values in the table.

 

Available Steel Grade

 

Steel grade Coating Yield(MPA) Tensile(MPA) Elongation(%)
DX51D Z,ZF -- 270-500 20
DX52D Z,ZF 140-300 270-420 22
DX53D Z,ZF 140-260 270-380 26
DX54D Z,ZF 140-220 270-350 30
S220GD Z,ZF 220 300 18
S250GD Z,ZF 250 330 17
S280GD Z,ZF 280 360 16
S320GD Z,ZF 320 390 15
S350GD Z,ZF 350 420 14
S400GD Z,ZF 400 470 --
S450GD Z,ZF 450 530 --
S500GD Z,ZF 500 560 --

 

Unlike ordinary galvanized steel, the precise matching of yield strength and coating thickness in S350GD galvanized steel ensures stable performance in high wind pressure and high corrosion environments. If you are facing material selection confusion or need to compare performance differences between different grades of galvanized steel, please feel free to contact us for one-on-one consulting services at any time.

 

S350GD galvanized steel price & technical datasheet.

 

SEND INQUIRY

SEND INQUIRY