Home-Knowledge-

Content

New processing technology for cold-rolled automotive sheets

Feb 23, 2024

Spot welding of automotive panels. The quality of the solder joints on the car directly affects the performance of the car. Spot welding is a resistance welding method in which welding parts are assembled into lap joints and pressed between two electrodes, using resistance heat to melt the base metal to form solder joints. The spot welding process is divided into three stages: 1) The weldment is pre-pressed between the electrodes; 2) The welding area is heated to a certain temperature after power is applied; 3) It is cooled under the pressure of the electrodes. During spot welding, electrodes of a certain diameter are used to pressurize. The workpiece to be welded is deformed under the dual effects of pressure and high temperature, and only the close contact in the welding area forms a current channel, while other parts do not form a current channel, thus obtaining extremely high results in the welding area. current density. Proceedings of the Second Academic Symposium on Steel Quality Control Technology 4 The strength of spot welded joints is evaluated by shear resistance and positive tension. The ratio of the positive tensile force Fn to the shear force Fs (K=Fn/Fs) is called the shear ratio. The larger the value, the better the plasticity of the joint. The positive tensile force Fn is obtained through the cross tensile test (CTS); the shear resistance Fs is obtained through the tensile shear test (TSS).

cold rolled steel

Application of laser technology in automobile assembly The rapid development of the automobile industry has promoted the rapid integration of laser processing technology and automobile assembly. Laser tailor welding technology will change the original process of stamping several plates of different thicknesses and different strengths into parts and then welding them into a whole piece, to a process where plates of different strengths and thicknesses are first punched and welded into a whole blank, and then Overall stamping forming. The advantages of laser tailor welding are: 1. Any combination of different materials; 2. The combination of parts can be integrated into one piece; 3. Improve the reliability and safety of the structure; 4. Meet the needs of automobiles for wide-width plates. These advantages of laser welded blanks are reflected in high quality, high efficiency and low cost in production. By using tailor-welded plates, the number of body parts is reduced by about 20% and the weight is reduced by 25%. Laser welded blanks have been widely used in various interior structural parts of automobiles such as interior door panels, longitudinal beams, floor plates, and columns.

cold rolled steel automotive

Painting technology of automobile panels More than 90% of the outer surface of automobiles is the painted surface. The painted automobile panels should have a high degree of functionality, that is, good corrosion resistance, weather resistance, mechanical impact resistance, etc. Its performance is The quality depends on the anti-corrosion performance and coating characteristics of the coated material itself and the comprehensive performance of the organic and inorganic composite coating layers covering it, which is the longitudinal cross-section of the coating used on each layer of coating surface. At the same time, the painted automobile panels should also have good decorative properties. The main characterization values are the orange peel value and the vivid DOI value that reflects the reflected image.

 

Phosphating technology Phosphating is the core process of automotive sheet processing. It generates a non-metallic, semi-conductive porous phosphate inorganic conversion film by reacting the surface of the steel plate and galvanized layer with an acidic phosphate solution. The basic reaction formula is as follows: (1) Fe+H+ Fe2++H2 (2) Me(H2PO4)2 MeHPO4+H+Me3(PO4)2+H+(3)Fe+ Me(H2PO4)2 MeFe(HPO4)2+H2 (4)Me(H2PO4)2+Fe(H2PO4)2+H2OMe3(PO4 )2·4H2O+Me2Fe(PO4)2·4H2O+H3PO4 Phosphating film Proceedings of the Second Academic Symposium on Steel Quality Control Technology 5 Galvanized sheet phosphating process: Me(H2PO4)2+ H2O Me3(PO4)2·4H2O +H+ Me: Zn, Mn, Ni, Ca The main function of the conversion coating is to increase the surface area of the substrate, increase the bonding force with the paint film, and improve the under-film anti-corrosion and water resistance of the coating. The low-zinc pseudo-conversion phosphating film, which is obtained by a ternary modified phosphating system of zinc, manganese and nickel through a dip-spraying process, is used as the bottom layer of electrophoretic primer and has become a standardized pre-treatment mode worldwide.

 

Electrophoresis technology Electrophoresis coating is a special paint film formation method. The basic principle is similar to metal electroplating, except that organic polymer substances are plated on the surface of the phosphating film, and the wet film obtained after electrophoresis is cross-linked and solidified by heating. Figure 3 Schematic diagram of cathodic electrophoresis Proceedings of the Second Academic Symposium on Steel Quality Control Technology 6 Figure 3 is a schematic diagram of cathodic electrophoresis developed in the 1970s. The chemical formula of the reaction process is as follows: Cathode (car body): 2H2O+2e- 2OH- +H2 Anode (pole) Board): 2H2O 4H+ +4e- +O2 Cathodic electrophoretic paint has the advantages of high transmission rate and high corrosion resistance of the coating. In addition, with the successful development of lead-free and tin-free environmentally friendly cathodic electrophoretic paint, it has gradually replaced the anode electrophoretic paint. equipment, and so far five generations of cathodic electrophoresis products have been technically formed. Currently, all luxury cars use cathodic electrophoresis to apply the first layer of organic coating.

SEND INQUIRY

SEND INQUIRY