Home-Knowledge-

Content

Low-carbon Steel Strip Cold-rolled DC01 DC03 DC04 DC05 DC06 DC07

Nov 27, 2025

Cold-rolled steel

 

What is Cold-rolled steel?

Cold-rolled low carbon steel, as its name implies, is a low carbon steel material treated by cold rolling process. Cold rolling is a method of steel processing performed at room temperature where hot-rolled steel is further processed by mechanical force to achieve higher dimensional accuracy and surface finish.

 

Cold-rolled steel

 

Ingredient list Of DC01-06 Cold Rolled Steel

Grade C Mn Si P S Cr TI Nb V
DX51D+AZ Min. / / / / /   /   /
Max. 0.43% 0.13% 0.03% 0.01% 0.01% / /  
DX53D+AS Min. / / / / /   0.06%   /
Max. 0.00% 0.13% 0 0.01% 0.006 / /
DC01 Min.   / /   /   /   /
Max. 4.2 17 0.3 19 8 / /
SGCC Min.   / /   /   /   /
Max. 5 16 1 13 17 / /
Q235B Min.   / /   /   /   /
Max. 2 2 2 3 3 / /
Q345B Min.   / /   /   2   2
Max. 2 3 3 3 3 2 3

 

Steel Grade

Yield Strength (MPa) min

Tensile Strength (MPa) min

Elongation % min

Old Description

DC01

≤280

270-410

28

St 12-03

DC03

≤240

270-370

34

St 13-03

DC04

≤210

270-350

38

St 14-03

DC05

≤180

270-330

40

St 15-03

DC06

≤170

270-330

41

-

DC07

≤150

250-310

44

-

 

How DC01 DC03 DC04 DC05 DC06 DC07 differ

DC01 (1.0330) - non-alloy quality; manufacturer's choice of deoxidation; slightly higher allowable carbon (relative to DC03–DC05). Use when standard formability with robust supply is needed.

DC02 - intermediate grade sometimes used where DC01 is too strong and DC03 is too soft; not always listed by every mill.

DC03 → DC05 - progressively improved formability and lower yield strength; typically aluminium-fully killed (controlled deoxidation) providing stable properties for deep drawing.

DC06 - an "alloy-quality" ultra-low carbon grade optimized for demanding deep-drawing and complex forming; often specified with titanium or niobium to control nitrogen and improve formability; industry suppliers produce DC06 to tighter chemical limits for highest formability.

 

Applications by grade

DC01 / DC02: simple pressings, housings, chassis frames where high formability isn't critical.

DC03 / DC04: appliance panels, light automotive panels, brackets, parts needing reasonable draw depth.

DC05 / DC06: intensive deep-drawing, complex formed components (automotive inner panels, fuel tanks, sophisticated stamped components).

 

We are manufacturer of steel products. We have quality steel coils and sheets for sale. Except for GI coils and sheets, we also have GL, PPGI, PPGL, Corrugated sheet, etc. to choose from. The standard seaworthy package contains waterproof kraft paper and plastic film inside, and steel sheets outside, then bound with steel strips. To secure it during transportation, we use wood pallets. During the two decades, we have developed complete systems from pre-sales consulting to after-sales service. Welcome to contact us for more information!

 

Cold-rolled steel

FAQ

 

1.Are DC-grades weldable?
Yes, standard welding processes apply; for coated products ensure fume controls and adjust parameters.

2.Do mills offer DC grades in coil and sheet/cut-length?
Yes; coils, slit coils and cut lengths are standard. Confirm coil weight and edge condition at order.

3.Can DC grades be supplied with higher strength?
Some can be supplied as alloyed steels (e.g., with small additions of B or Ti) by agreement with the purchaser; specify when ordering.

4.What certificates should I request?
Typical: mill test certificate (EN 10204 2.1) or specific 3.1/3.2 documents for higher assurance. State required certificate at enquiry.

 

SEND INQUIRY

SEND INQUIRY