Introduction to automotive steel standards
Automotive steel is one of the types with very high added value in the steel trade. Automotive steel often uses the following three types of standards (or specifically signs technical agreements).

1. Corporate standards of steel mills
Such as Baosteel's enterprise standard Q/BQB, Wuhan Iron and Steel's enterprise standard Q/WG, Anshan Iron and Steel's enterprise standard Q/ASB, Shougang's enterprise standard Q/SGZGS, etc.
2. Enterprise standards for large terminals
Such as GM's GMW series, Volkswagen's VW series, Ford's WSS series, Dongfeng's EQ series, Honda's HES series, etc.

3. Standards formulated by national standards or standardization organizations of various countries, such as GB, ASTM, JIS, EN, DIN, ISO, SAE, etc.
Dangers of not being familiar with standards
Due to various historical reasons and objective factors, the steel industry chain will be exposed to various different standards. When various standards are not unified and the differences between them are not understood, various trade disputes are prone to occur.
For example, the grade WSS M1A365 A12 in the Ford Motor Company standard has a certain approximate relationship with Baosteel's enterprise grade Q/BQB408-2014 DC03.
However, the two have different requirements on many indicators. The most typical ones are N value and R value, two indicators that affect stamping performance. The Ford standard has specific requirements, but DC03 and its similar grades in many standards do not require this.
If you blindly draw equal signs, you may face the risk of batch stamping cracking.


