Home-Knowledge-

Content

How to make stainless steel pattern plate

Mar 08, 2024

1.Embossed

This is also the most commonly used method at present, and it is also a lower cost method. By applying pressure to a mold, die or roller, localized material is plastically deformed to obtain a pattern. Pressure processing includes stamping, hydrostatic pressing or rolling. There is internal stress after stamping. Use the above method to reduce stress and deformation. Depending on the tensile properties of the mold and stainless steel plate, the punch depth can be deep or shallow, which can become a permanent sign of stress.

stainless steel products manufacturers

 

2.Chemical corrosion method

Through various printing techniques or photo engraving, the surface of the stainless steel plate is first covered with a patterned anti-corrosion film and then etched in a suitable corrosive solution. After removing the film, a high-precision pattern was obtained. This method is suitable for mass production. This is how we commonly make currency plates and black titanium marble.

 

3. Engraving and milling

Use mechanical equipment such as engraving machines, profiling machines, and printing presses to operate rotating tools for milling or manual engraving. This method can only be engraved on flat steel plates to facilitate deep milling. This method is expensive but has a strong three-dimensional feel.

stainless steel product

4.Sandblasting method

Use compressed air to spray high-speed silicon carbide on the surface of the stainless steel plate surrounded by the template to form a sand mold. The surface produced by the sandblasting method is rough, making it difficult to spray thin strip patterns, and the depth generally does not exceed 0.08mm.

 

5.Electrochemical corrosion

In a suitable electrochemical corrosion solution, the surface of the stainless steel plate is etched with an auxiliary electrode to obtain an etching pattern. The etching speed is fast and the etching depth is large, requiring special equipment.

SEND INQUIRY

SEND INQUIRY