Home-Knowledge-

Content

High Quality DC07 China Steel Cold Rolled Steel Coil

Dec 01, 2025

DC07 Cold Rolled Steel

 

What is Cold Rolled Steel?

Cold rolled steel is directly rolled into a certain thickness by rollers atnormal temperature and rolled into a whole coil by a winder. Compared withhot rolled coil, cold rolled coil has bright surface and hiah smoothness, but itwill produce more internal stress, so it is often annealed after cold rolling.

 

1.Standard: AISI, ASTM, BS, DIN, GB, JIS
2 Grade: SPCC, DC01, DC02,DCO3, DCO4,ST12,ST13,ST14,ST15, SPCD, SPCE3.Width:1219mm
4.Thickness:0.4mm, 1mm, 1.5mm, etc.
5.Coil lD:508mm/610mm or as per customer's requirement6 Coil weight from 6-15MT, according to the customer's request7.Surface treatment: Chemical passivating, oils, passivating + oils
8.Packing: standard sea-worthy packing

 

DC07 Cold Rolled Steel

Classification of Cold-Rolled Steel Sheet

Classification Designation Size (mm) Main Applications Characteristics
Commercial quality SPCC Thickness: 0.18 – 3.0 Width: 600 – 1500 Refrigerators, Drums, Distribution boards, Cabinets, Power equipment Commercial quality suitable for bending, fabrication and simple forming; this grade has the highest market demand.
Drawing quality SPCD Thickness: 0.18 – 2.0 Width: 600 – 1250 Automobile floor and roof panels Drawing quality, second only to SPCEN; offers excellent uniformity.
Deep-drawing quality SPCE / SPCF Thickness: 0.18 – 2.0 Width: 600 – 1250 Automobile fenders and quarter panels Deep-drawing quality. With metallurgically controlled grain size, it maintains a beautiful surface finish even after deep-drawing.

 

Application Scenarios

Cold rolled steel are widely used, such as automobile manufacturing,. elecrical products, roling stock, avalion, precision instruments,.canned food and so on
DCO1,DC02,DCB3,DC04, DC06, C07, Pcc, sPD, sPcE geades are usualy used for pats fomed bydep drawingwih generalfoming kmives!tly is a great wayt imprve our merchandise and repaiOu.mision shoud be to ceale imaonaive poducs to pospads wiha excelet knowede for hih 0ualy chima Siee Coil ow Gaton cold Roled siel colD00 We are sinrerew lookin fomeard tcooperate with customers all over the world. We believe we can satisfy you. We also warmly welcome customers to visit our company and purchase our productsHigh Quaty hina CR silel Co, Siel Co,We are seekin the chances to met a the fiendsfrom boh at home and abroad forthe wirwin coperation.We sincerely hope to have longtem cooperaion wiall of you on the bases of mutual benefit and common development.

DC07 Cold Rolled Steel

Our company can also supply the following cold-rolled steel grades:
DC01 – Designed for basic forming processes such as bending, embossing, beading and standard drawing operations.
DC03 – Intended for more demanding forming applications, including deep drawing and more complex profiling.
DC04 – Suitable for applications requiring high levels of formability.
DC05 – A deep-drawing grade developed to meet very high forming requirements.
DC06 – A special deep-drawing grade engineered for the highest demands in cold forming.
DC07 – An ultra deep-drawing grade tailored for extreme and highly challenging forming operations.
 

FAQ

1. What is the chemical composition of DC07?
DC07 is a low-carbon titanium alloy IF steel (interstitial-free steel). Its specific chemical composition (e.g., maximum percentage of carbon, manganese, silicon, phosphorus, and sulfur) conforms to relevant standards such as EN 10130.
2. What are the mechanical properties of DC07?
The mechanical properties of DC07 typically include: tensile strength of approximately 250–310 MPa, yield strength of approximately 100–150 MPa, and elongation at break usually ≥44% (depending on thickness).
3. Will DC07 steel plate rust?
Yes, it will rust. DC07 is carbon steel, whose main component is iron, and it will oxidize in humid air to form rust. Surface treatment (such as galvanizing, oiling, or painting) is required for corrosion protection.
4. Is DC07 hot-rolled or cold-rolled steel?
DC07 is cold-rolled steel. The cold-rolling process is carried out at room temperature below the recrystallization temperature of the steel to obtain a smoother surface and more precise dimensional tolerances.

SEND INQUIRY

SEND INQUIRY