Flowered galvanized sheet
1. Packaging is divided into two types: galvanized steel sheets cut into fixed lengths and galvanized steel sheets in coils. It is generally packed in tinplate, lined with moisture-proof paper, and tied with an iron waist on the outside. The fastening is firm and prevents the galvanized steel plates inside from rubbing against each other.

2. The material limits related to specifications (such as the following and) indicate the recommended thickness, length and width of galvanized steel sheets, as well as permission issues. In addition, the width and length of the board and the width of the roll can also be determined according to customer requirements.

3. Surface overview: Due to the contradictory treatment methods in the coating process of galvanized steel sheets, the overview is also contradictory, such as the overview of general zinc flower, fine zinc flower, flat zinc flower, no zinc flower and phosphating treatment, etc. Galvanized steel sheets and galvanized sheet coils cut into fixed lengths must not have defects that may affect their use (explained below), but steel coils are allowed to have electric welding positions, etc., which are not abnormal units.

4. Hot-dip galvanizing amount Hot-dip galvanizing amount limit value: Hot-dip galvanizing amount is a commonly used and effective method to indicate the thickness of the zinc layer of galvanized steel sheets. There are two types of hot-dip galvanizing: the same amount of hot-dip galvanizing on both sides (i.e., hot-dip galvanizing of equal thickness) and the contradictory amount of hot-dip galvanizing on both sides (i.e., hot-dip galvanizing of different thicknesses). The hot-dip galvanizing capacity of the module is g/m2.
5. Equipment functions
(1) Compressive strength test: Generally speaking, if galvanized steel sheets for structural, drawn and deep-drawn purposes have compressive strength performance requirements.
(2) Bending test: It is an important category to measure the performance of metal sheet processing technology. However, the regulatory requirements for various galvanized steel sheets in various countries are actually different. It is generally required that after the galvanized steel plate is bent 180o, there should be no zinc layer peeling off on both sides, and the base of the plate should not be cracked or cracked.
6. Composition requirements for the composition of hot-dip galvanized steel sheets are inconsistent in national regulations. For example, Japan did not plead, but Britain did. Generally no product inspection is done.
7. Board Shape Measurement There are two goals for board shape black and white, namely verticality and long blade bend. There is a certain division between the verticality of the board and the maximum allowable limits of the long blade bend.
Patterned galvanized sheet is a galvanized steel sheet with patterns printed on its surface. The appearance looks very bright and beautiful. It is generally used as household appliance casings, plastic buckets, etc. The galvanized steel sheet has no lines on its surface and looks brighter. Hot-dip galvanizing is brighter than flowery and has a dark color, similar to cold-rolled steel plates. There is no difference in characteristics, mainly appearance.


