Home-Knowledge-

Content

DX53D+ZM Galvanized Steel Coil

Galvanized Steel coil

 

Galvanized Steel coil a thin steel plate is immersed in a molten zinc bath so that its surface is adhered to a thin sheet of zinc. It is mainly produced by continuous galvanizing process, that is, the coiled steel plate is continuously immersed in the molten zinc plating groove to make galvanized steel coil; alloyed galvanized steel coil. This galvanized coil has good coating adhesion and weldability.

 

Galvanized Steel coil

Specification:

 

ltem DX53D+ZM Galvanized Steel Coil
Grade DX53D+ZM
Thickness 0.13-4.0mm
Width 600-1500 mm
Zinc Coating 40-275g/m2
Surface Treatment Light Oil, Unoil,dry, chromate passivated, non-chromate passivated.
Spangle Regular spangle, minimal spangle, zero spangle, big spangle
Coil Weight 3-5 Tons or as customer requirements
Coil ID 508/610 mm

 

Zinc Coated:

With the cold rolled steel of different strength and thickness as substrate, it is produced through applying the zinc coated on both faces by hot dip process.

 

Galvanized steel is to prevent the steel plate surface from corrosion to extend its service life, in the steel plate surface coated with a layer of metal zinc, the zinc coated steel plate are called galvanized sheet. According to the production and processing methods can be divided into the following categories:

 

(1) Hot dip galvanized steel. Thin plate in melting zinc bath, make its surface adhesion of a layer of zinc sheet. At present mainly adopts continuous galvanizing process, namely the continuous roll of steel plate in the melt zinc plating tank made of galvanized steel sheet;
(2) The alloying of galvanized steel. This kind of steel plate is made by hot dip method, but after the slot, immediately heated to a temperature of about 500 ℃, it make the generation of zinc and iron alloy membrane. This kind of galvanized sheet with good coating of sex and weldability;
(3) Electric galvanized steel. Made this kind of galvanized steel plating method has good workability. But the coating is thinner,the corrosion resistance and the method of hot dip galvanized sheet
(4) The single side and double difference galvanized steel plating. Single galvanized steel, that is, only in a galvanized products. Material in the antirust processing, welding, painting, machining, etc., two-sided galvanized sheet better adaptability.In order to overcome the single side not the shortcoming of zinc coating, and one in the other side is coated with a thin layer of zinc galvanized sheet, namely double difference galvanized sheet;
(5) Alloy and composite galvanized steel. It is made from zinc and other metals such as aluminum, lead, zinc alloy and composite plating of steel plate. This steel has excellent rust resistance, and good coating performance,Besides the above five kinds of color galvanized steel plate, printing and coating of galvanized steel sheet, PVC laminated galvanized steel sheet, etc. But still by far the most commonly used for hot dip galvanized sheet.

 

Surface Treatment Types

 

Surface Treatment Type Code Characteristics
Chromate treatment C Good corrosion resistance, suitable for exposed conditions
Chromate treatment + oiled S Good corrosion resistance
Phosphate treatment (with passivation) P Moderate corrosion resistance, good paint adhesion
Phosphate treatment (with passivation) + oiled Q Moderate corrosion resistance, good paint adhesion, prevents rusting during transportation and storage
Phosphate treatment (without passivation) T Moderate corrosion resistance, good paint adhesion
Phosphate treatment (without passivation) + oiled V Moderate corrosion resistance, good paint adhesion, prevents rusting
Oiled O Prevents rusting during transportation and storage
No treatment M Suitable for immediate painting

Surface Treatment Types Table

 

Equivalent Material Replacement of DX53D

 

DX53D steel has equivalent material replacements in other international standards. One common equivalent is:

ASTM A653/A653M: Grade 340
These equivalent grades ensure cross-compatibility and facilitate international trade and sourcing of DX53D steel.

 

GNEE STEEL supplies DX53D galvanized steel coil and sheet with strict quality control, full specification coverage, and reliable global delivery. Our technical team assists customers in optimizing material selection, helping manufacturers achieve higher productivity and lower operational risk.

 

📩 Contact GNEE STEEL today for professional consultation and competitive quotation.

 

Contact now

 

Galvanized Steel coil

SEND INQUIRY

SEND INQUIRY