Home-Knowledge-

Content

Dx53D Galvanized Steel Coil for Cutting Bending Welding Processing

Dx53D Galvanized Steel

 

DX53D is a cold-rolled galvanized steel coil renowned for its exceptional properties. Similar to DX52D, the "DX" in DX53D refers to the base material. The number "53" indicates its suitability for deep drawing, and higher numbers like 51, 52, and 54 represent different grades with varying properties. The final "D" signifies its excellent bending and forming capabilities.

 

Galvanized steel coil, immersing the thin steel plate in the molten zinc bath, and adhering a layer of zinc thin on the surface. It is mainly produced by the continuous galvanizing process, that is, the coiled steel plate is continuously immersed in the zinc-melted plating tank to make galvanized steel plate; alloyed galvanized steel plate. This kind of steel plate is also made by the hot-dip method, but it is heated to about 500 °C immediately after exiting the tank to form an alloy film of zinc and iron. This galvanized steel coil has good paint adhesion and weldability.

 

Dx53D Galvanized Steel

Specifications

 

Product Name

Galvanized coil

Standard

AISI / ASTM / DIN / JIS / GB / JIS / SUS / EN etc.

Material

DX51D, DX52D, DX53D, DC51D, DC52D, DC53D, SGCC, SGCD, SGCE

Thickness

0.12-6.00mm or customers requirement

Width

600mm-1500mm, according to customer's requirement

Length

1-12m or as required

Type of coating

Hot Dipped Galvanized Steel

MOQ

1tons.Sample order can be accept.

Surface Treatment

Clean, blasting and painting according to customer requirement

Thickness tolerance

0.15mm or as required

Export packing

Waterproof paper, and steel strip packed standard export seaworthy Package. suit for all kinds of transport, or as required.

 

 

Application

1.Fence, greenhouse, door pipe;

2.Low pressure liquid, water, gas, oil, line pipe;

3.For both indoor and outdoor the building construction;

4.Widely used in scaffolding construction which is much cheaper and convenien.

 

Galvanized steel is to prevent the steel plate surface from corrosion to extend its service life, in the steel plate surface coated with a layer of metal zinc, the zinc coated steel plate are called galvanized sheet. According to the production and processing methods can be divided into the following categories:

 

(1) Hot dip galvanized steel. Thin plate in melting zinc bath, make its surface adhesion of a layer of zinc sheet. At present mainly adopts continuous galvanizing process, namely the continuous roll of steel plate in the melt zinc plating tank made of galvanized steel sheet;
(2) The alloying of galvanized steel. This kind of steel plate is made by hot dip method, but after the slot, immediately heated to a temperature of about 500 ℃, it make the generation of zinc and iron alloy membrane. This kind of galvanized sheet with good coating of sex and weldability;
(3) Electric galvanized steel. Made this kind of galvanized steel plating method has good workability. But the coating is thinner,the corrosion resistance and the method of hot dip galvanized sheet
(4) The single side and double difference galvanized steel plating. Single galvanized steel, that is, only in a galvanized products. Material in the antirust processing, welding, painting, machining, etc., two-sided galvanized sheet better adaptability.In order to overcome the single side not the shortcoming of zinc coating, and one in the other side is coated with a thin layer of zinc galvanized sheet, namely double difference galvanized sheet;
(5) Alloy and composite galvanized steel. It is made from zinc and other metals such as aluminum, lead, zinc alloy and composite plating of steel plate. This steel has excellent rust resistance, and good coating performance,Besides the above five kinds of color galvanized steel plate, printing and coating of galvanized steel sheet, PVC laminated galvanized steel sheet, etc. But still by far the most commonly used for hot dip galvanized sheet.

 

DX53D Galvanized Steel Coil Chemical Composition

 

Element Maximum Content (%)
Carbon (C) 0.12
Silicon (Si) 0.5
Manganese (Mn) 0.6
Phosphorus (P) 0.1
Sulfur (S) 0.045
Titanium (Ti) 0.3

 

DX53D Galvanized Steel Coil Mecahmical Properties

 

Property Value
Tensile Strength (Rm) 270 – 380 MPa
Yield Strength (Re) / (Rp0.2) 140 – 260 MPa
Minimum Elongation (A80) ≥ 30%

 

GNEE STEEL delivers high-quality DX53D galvanized steel coil and sheet with consistent mechanical properties, reliable zinc coating, customized specifications, and professional export packaging. Our customers benefit from stable supply, competitive pricing and full technical support from inquiry to delivery.

 

📩 Send your inquiry to GNEE STEEL today to receive expert advice and tailored quotation for your project.

Contact now

 

Dx53D Galvanized Steel

SEND INQUIRY

SEND INQUIRY