galvanized stee
DX53D Z80 hot dip 1.2mm thick galvanized steel coil is a premium deep drawing grade galvanized product manufactured under EN 10346 standard. It combines a high-purity low-carbon cold rolled steel substrate with a uniform Z80 zinc coating through continuous hot dip galvanizing. This structure delivers superior formability, stable mechanical properties and long-term corrosion protection.
The 1.2mm thickness provides an optimal balance between strength and formability, while the Z80 coating offers reliable corrosion resistance for indoor and light outdoor environments. This product is widely used in automotive components, appliance housings, HVAC systems, steel furniture and light structural fabrication.

Chemical Composition
| Element | C | Mn | P | S | Al |
|---|---|---|---|---|---|
| Max % | 0.08 | 0.45 | 0.030 | 0.025 | 0.015 |
Mechanical Properties
| Property | Typical Value |
|---|---|
| Yield Strength | 140–220 MPa |
| Tensile Strength | 270–380 MPa |
| Elongation | ≥36% |
| Hardness | ≤110 HV |
DX51D vs DX53D: Deep Drawing Performance Comparison
| Feature | DX51D | DX53D |
|---|---|---|
| Elongation | ≥22% | ≥36% |
| Formability | Good | Excellent |
| Surface After Forming | Fair | Superior |
| Production Scrap Rate | Medium | Very Low |
-
Manufacturing Case
In electrical enclosure production using 1.2mm thickness coils, DX51D frequently showed edge cracking and uneven surface after bending. After switching to DX53D Z80 galvanized steel coil, manufacturers achieved consistent forming results, improved surface quality and reduced scrap by over 25%.
Galvanized steel coil, immersing the thin steel plate in the molten zinc bath, and adhering a layer of zinc thin on the surface. It is mainly produced by the continuous galvanizing process, that is, the coiled steel plate is continuously immersed in the zinc-melted plating tank to make galvanized steel plate; alloyed galvanized steel plate. This kind of steel plate is also made by the hot-dip method, but it is heated to about 500 °C immediately after exiting the tank to form an alloy film of zinc and iron. This galvanized steel coil has good paint adhesion and weldability.
Z80 Coating Performance and Application Advantages
| Coating Type | Coating Weight (g/m²) | Typical Use |
|---|---|---|
| Z80 | 80 | Indoor & mild outdoor |
| Z120 | 120 | General outdoor |
| Z275 | 275 | Harsh outdoor |
| Thickness (mm) | Width (mm) | Coil Weight (MT) |
|---|---|---|
| 1.2 | 600–1500 | 3–25 |
Main Applications
- Appliance casings and panels
- HVAC ducting and ventilation systems
- Electrical cabinets and control boxes
- Steel shelving and furniture
- Light building components
Mechanical Properties
| Grade | Coating | Standard | Yield strength Re (MPa) | Tensile strength Rm (MPa) | Elongation A80 (min %) | r90 (min) | n90 (min) |
|---|---|---|---|---|---|---|---|
| DX51D | Z, ZA, ZF | EN 10346 | - | 270 – 500 | 22 | - | - |
| DX52D | Z, ZA, ZF | EN 10346 | 140 – 300 ²) | 270 – 420 | 26 | - | - |
| DX53D | Z, ZA, ZF | EN 10346 | 140 – 260 | 270 – 380 | 30 | - | - |
| DX54D | Z, ZA, ZF | EN 10346 | 120 – 220 | 260 – 350 | 36 | 1.6 ⁴) | 0.18 |
| DX56D | Z, ZA, ZF | EN 10346 | 120 – 180 | 260 – 350 | 39 | 1.9 ⁵) | 0.21 ⁵) |
| DX57D | Z, ZA | EN 10346 | 120 – 170 | 260 – 350 | 41 | 2.1 ⁵) | 0.22 |
GNEE STEEL supplies DX53D Z80 hot dip 1.2mm galvanized steel coil with strict quality control, stable coating thickness and reliable mechanical performance. Our export-oriented service system ensures every order meets customer requirements and international standards.
📩 Contact GNEE STEEL today for technical support and a competitive quotation.



