Galvanized Steel Coil
Galvanized Coil has excellent performance, possessing ideal comprehensive properties of corrosion resistance, formation and coating. It is produced by passing the steel sheet which has undergone the acid washing process and rolling process through the zinc pot, thereby applying zinc film to the surface. It has excellent corrosion resistance, paintability, and workability due to Zinc's characteristic.
Galvanized steel coil, immersing the thin steel plate in the molten zinc bath, and adhering a layer of zinc thin on the surface. It is mainly produced by the continuous galvanizing process, that is, the coiled steel plate is continuously immersed in the zinc-melted plating tank to make galvanized steel plate; alloyed galvanized steel plate. This kind of steel plate is also made by the hot-dip method, but it is heated to about 500 °C immediately after exiting the tank to form an alloy film of zinc and iron. This galvanized steel coil has good paint adhesion and weldability.

Specification
| SPECIFICATION PARAMETER | |
| Commodity | Zinc coated steel |
| Grade | Q195, Q235 |
| SGCC, SGCH,SGC340 SGC400 SGC440 SGC490 SGC570 | |
| SGHC SGH340 SGH400 SGH440 SGH490 SGH540 | |
| DX51D DX52D DX53D DX54D | |
| S220GD S250GD S280GD S320GD S350GD S400GD S500GD S550GD | |
| Standard | JIS G3302 ASTM A653M Q/BQB 420-1999 AS10147-90 EN10147-90 |
| Mechanical | Commercial / Drawing / Deep Drawing / Extra Deep Drawing/Structural quality |
| Spangle | Zero Spangle, Regular Spangle, Small Spangle, Big Spangle |
| Zinc coated | 40-275g/m2 |
| Surface treatment | Chromated and oiled, and anti-finger |
| Hardness | Softy , half hard and hard quality |
| Thickness | 0.11-5.0mm |
| Width | 600-1500mm |
| Supply Ability | 30000MT/month |
| Coil weight | 3-8MT/Coil or as your request |
| MOQ | 5MT |
| Packaging | Export standard, seaworthy |
| Substrate | Cold rolled Substrate,Hot rolled Substrate |
| ID | 508mm or 610mm |
DX53D Galvanized Steel Coil Chemical Composition
| Element | Maximum Content (%) |
| Carbon (C) | 0.12 |
| Silicon (Si) | 0.5 |
| Manganese (Mn) | 0.6 |
| Phosphorus (P) | 0.1 |
| Sulfur (S) | 0.045 |
| Titanium (Ti) | 0.3 |
DX53D Galvanized Steel Coil Mecahmical Properties
| Property | Value |
| Tensile Strength (Rm) | 270 – 380 MPa |
| Yield Strength (Re) / (Rp0.2) | 140 – 260 MPa |
| Minimum Elongation (A80) | ≥ 30% |
For thinner DX53D galvanized steel sheets, the minimum elongation values decrease as the thickness reduces. The adjustments are as follows:
0.5mm < t ≤ 0.7mm → Min elongation is 2% lower than the table value.
0.35mm < t ≤ 0.5mm → Min elongation is 4% lower than the table value.
t ≤ 0.35mm → Min elongation is 7% lower than the table value.
Key Characteristics of DX53D Galvanized Steel
- Excellent deep drawing performance
- High elongation and uniform thickness
- Smooth surface suitable for painting and coating
- Strong corrosion protection from zinc coating
- Stable mechanical properties and consistent quality
-
Mechanical Properties
| Grade | Coating | Standard | Yield strength Re (MPa) | Tensile strength Rm (MPa) | Elongation A80 (min %) | r90 (min) | n90 (min) |
|---|---|---|---|---|---|---|---|
| DX51D | Z, ZA, ZF | EN 10346 | - | 270 – 500 | 22 | - | - |
| DX52D | Z, ZA, ZF | EN 10346 | 140 – 300 ²) | 270 – 420 | 26 | - | - |
| DX53D | Z, ZA, ZF | EN 10346 | 140 – 260 | 270 – 380 | 30 | - | - |
| DX54D | Z, ZA, ZF | EN 10346 | 120 – 220 | 260 – 350 | 36 | 1.6 ⁴) | 0.18 |
| DX56D | Z, ZA, ZF | EN 10346 | 120 – 180 | 260 – 350 | 39 | 1.9 ⁵) | 0.21 ⁵) |
| DX57D | Z, ZA | EN 10346 | 120 – 170 | 260 – 350 | 41 | 2.1 ⁵) | 0.22 |
GNEE STEEL supplies high-consistency DX53D galvanized steel coil and sheet with strict EN 10346 compliance, full specification coverage and professional export service. From material selection to delivery, every step is optimized to help manufacturers improve product reliability and lower production costs.
📩 Request your DX53D galvanized steel quotation from GNEE STEEL today.



