DX53D galvanized steel
DX53D is a cold-rolled galvanized steel coil renowned for its exceptional properties. Similar to DX52D, the "DX" in DX53D refers to the base material. The number "53" indicates its suitability for deep drawing, and higher numbers like 51, 52, and 54 represent different grades with varying properties. The final "D" signifies its excellent bending and forming capabilities.
DX53D galvanized steel is a deep drawing quality zinc-coated steel produced under EN 10346 standard. By combining a low-carbon cold rolled substrate with a uniform hot-dip galvanized coating, DX53D achieves a rare balance of excellent mechanical performance, surface quality, and corrosion resistance. These features allow it to meet the demanding requirements of modern manufacturing industries such as automotive, appliance production, electrical equipment, and construction.
Unlike common commercial galvanized steel, DX53D is engineered for complex forming operations where material stability and repeatability are critical.

Core Mechanical Properties of DX53D Galvanized Steel
| Property | Typical Range |
|---|---|
| Yield Strength | 140–220 MPa |
| Tensile Strength | 270–380 MPa |
| Elongation (A80) | ≥36% |
| Hardness | ≤110 HV |
| r-Value (plastic strain ratio) | ≥1.6 |
These values indicate that DX53D offers superior deformation capacity with low resistance during forming, which reduces tool wear and enhances production efficiency.
Fatigue and Forming Stability
DX53D maintains stable mechanical behavior under repeated forming loads, making it especially suitable for automated production lines where consistent quality is mandatory.
Performance Advantages Over Common Galvanized Grades
| Feature | DX51D | DX52D | DX53D |
|---|---|---|---|
| Elongation | ≥22% | ≥30% | ≥36% |
| Formability | Good | Very Good | Excellent |
| Scrap Rate | Medium | Low | Very Low |
| Surface After Forming | Fair | Good | Excellent |
Factory Case Example
In automotive seat frame production, replacing DX52D with DX53D galvanized steel resulted in a 28% reduction in cracking defects and a 19% improvement in forming efficiency, directly lowering manufacturing costs.
Welding and Surface
| Property | Performance |
|---|---|
| Spot Welding | Excellent |
| Seam Welding | Stable |
| Paint Adhesion | Outstanding |
| Coating Integrity After Forming | Very High |
The uniform zinc coating on DX53D remains intact even after severe deformation, ensuring long-term corrosion protection.
DX53D Galvanized Steel Applications
Automotive Industry: Car body panels, inner structural parts, reinforcement components, fuel tanks, chassis components, battery casings, and decorative trims.
Household Appliances: Washing machine drums, refrigerator panels, oven enclosures, air conditioner casings, dishwasher interiors, and microwave oven structures.
Construction and Roofing: Metal cladding, roofing sheets, wall panels, structural profiles, rainwater drainage systems, garage doors, and insulation-backed panels.
Electrical and Industrial Equipment: Electrical enclosures, control cabinets, transformer casings, air ventilation ducts, industrial storage units, and safety barriers.
Furniture and Decorative Applications: Storage cabinets, office furniture frames, shelving systems, modular partitions, architectural facades, and decorative panels.
DX53D galvanized steel components exhibit improved fatigue resistance and stable structural performance over long service cycles. This makes the material especially valuable in safety-related parts such as structural reinforcements, appliance housings, and load-bearing building components.
GNEE STEEL supplies DX53D galvanized steel coil and sheet with strict quality control, full specification coverage, and reliable global delivery. Our technical team assists customers in optimizing material selection, helping manufacturers achieve higher productivity and lower operational risk.
Contact GNEE STEEL today for professional consultation and competitive quotation.
-
Mechanical Properties
| Grade | Coating | Standard | Yield strength Re (MPa) | Tensile strength Rm (MPa) | Elongation A80 (min %) | r90 (min) | n90 (min) |
|---|---|---|---|---|---|---|---|
| DX51D | Z, ZA, ZF | EN 10346 | - | 270 – 500 | 22 | - | - |
| DX52D | Z, ZA, ZF | EN 10346 | 140 – 300 ²) | 270 – 420 | 26 | - | - |
| DX53D | Z, ZA, ZF | EN 10346 | 140 – 260 | 270 – 380 | 30 | - | - |
| DX54D | Z, ZA, ZF | EN 10346 | 120 – 220 | 260 – 350 | 36 | 1.6 ⁴) | 0.18 |
| DX56D | Z, ZA, ZF | EN 10346 | 120 – 180 | 260 – 350 | 39 | 1.9 ⁵) | 0.21 ⁵) |
| DX57D | Z, ZA | EN 10346 | 120 – 170 | 260 – 350 | 41 | 2.1 ⁵) | 0.22 |



