Home-Knowledge-

Content

DX53D Galvanized Steel Sheet High-Quality

galvanized steel sheet

 

DX53D galvanized steel sheet is produced from high-quality cold rolled steel substrate through continuous hot-dip galvanizing. The zinc coating provides long-term corrosion protection while the steel core offers exceptional ductility and formability. This combination makes DX53D one of the most reliable deep drawing galvanized steel grades in the global market.

 

It is extensively used in automotive body parts, household appliance housings, electrical enclosures, ventilation systems, and precision structural components where both forming performance and surface quality are critical.

 

galvanized steel sheet

  • Chemical Composition

Element C Mn P S Al
% Max 0.08 0.45 0.030 0.025 0.015

 

  • Mechanical Properties

Property Value
Yield Strength 140–220 MPa
Tensile Strength 270–380 MPa
Elongation ≥36%
Bending 0T–1T

 

DX54D vs DX53D - Deep Drawing Comparison

 

Feature DX53D DX54D
Formability Excellent Extra-deep drawing
Elongation ≥36% ≥40%
Typical Use Appliances, auto panels Ultra-complex parts
Cost Level Medium Higher

 

Industrial Case

In the production of washing machine inner drums, DX53D provides an optimal balance between cost and forming stability. While DX54D allows slightly deeper forming, DX53D achieves nearly the same performance with significantly better cost control, making it the preferred grade for mass production.

 

Common Specifications of DX53D Galvanized Steel Sheet

 

Thickness (mm) Width (mm) Length (mm)
0.30–3.00 600–1500 1000–6000

 

Zinc Coating Coating Weight (g/m²) Service Environment
Z100–Z275 100–275 General indoor
Z275–Z450 275–450 Outdoor & marine

 

Key Application Sectors

 

  • Automotive inner panels and reinforcements
  • Refrigerator, oven, air conditioner housings
  • Cable trays and switch cabinets
  • Metal furniture and shelving
  • Prefabricated building components
  • Ventilation duct systems

 

The uniform zinc coating ensures superior corrosion protection even after deep drawing and bending, greatly extending service life.

 

  • Mechanical Properties

 

Grade Coating Standard Yield strength Re (MPa) Tensile strength Rm (MPa) Elongation A80 (min %) r90 (min) n90 (min)
DX51D Z, ZA, ZF EN 10346 - 270 – 500 22 - -
DX52D Z, ZA, ZF EN 10346 140 – 300 ²) 270 – 420 26 - -
DX53D Z, ZA, ZF EN 10346 140 – 260 270 – 380 30 - -
DX54D Z, ZA, ZF EN 10346 120 – 220 260 – 350 36 1.6 ⁴) 0.18
DX56D Z, ZA, ZF EN 10346 120 – 180 260 – 350 39 1.9 ⁵) 0.21 ⁵)
DX57D Z, ZA EN 10346 120 – 170 260 – 350 41 2.1 ⁵) 0.22

 

GNEE STEEL supplies premium DX53D galvanized steel sheet with stable mechanical properties, consistent coating quality, flexible specifications and full export support. Our strict quality management ensures every shipment meets international standards and customer expectations.

 

Contact GNEE STEEL today for technical support and competitive pricing.

 

Contact now

Galvanized Steel Sheet

SEND INQUIRY

SEND INQUIRY