Home-Knowledge-

Content

DX53D Galvanized steel sheet 1.0355 1.0952

galvanized steel sheet

 

DX53D galvanized steel sheet is a steel plate with a layer of zinc on the surface, which is designed to prevent corrosion on the surface of the steel plate and extend its service life. This kind of galvanized sheet has a good appearance and must not have defects that are harmful to the use of the product, such as no plating, holes, cracks and scum, excessive plating thickness, scratches, chromic acid dirt, white rust, etc.

 

DX53D galvanized steel sheet

What Are 1.0355 and 1.0952?

 

1.0355 and 1.0952 are European steel material numbers assigned under the EN standard system.

1.0355 corresponds to DX53D hot-dip galvanized steel for cold forming according to EN 10346.

1.0952 is the material number for the same base grade when supplied with metallic coating, commonly used in galvanized sheet production.

These numbers provide unified material identification across European and international markets, ensuring traceability, quality consistency, and compliance for engineering applications.

DX53D galvanized steel sheet produced under these material numbers is specifically designed for deep drawing and complex forming, offering excellent surface quality, stable mechanical performance, and outstanding corrosion resistance.

 

Product Specification

 

Product DX53D Galvanized Steel Sheet
Standards JIS G3302, ASTM A653M, EN10327, DIN 17162, EN 10142, EN 10147, EN 10292
Material Grades DX51D+Z, DX52D+Z, DX53D+Z, DX54D+Z, S220GD+Z, DX51D+Z/SGCC/A653, etc.
Zinc Coating 40-600g/㎡
Width 1000mm, 1219mm, 1250mm, 1500mm, or customized
Thickness 0.1-6.5mm or customized
Surface Finish Regular Spangle, Big Spangle, Minimum Spangle, Zero Spangle

 

Typical Mechanical Properties of DX53D

 

Property Typical Value
Yield Strength (MPa) 140 – 260
Tensile Strength (MPa) 270 – 380
Elongation A80 (%) ≥ 30

These values allow DX53D galvanized sheet to undergo deep drawing, bending, and complex shaping without cracking or surface defects.

 

Why DX53D Is Widely Used

 

DX53D galvanized steel sheet with material numbers 1.0355 / 1.0952 is widely used in:

  • Automotive structural and exterior parts
  • Home appliance housings
  • HVAC ducts
  • Building panels
  • Agricultural equipment

Its balance of strength and ductility makes it ideal for components requiring both structural stability and high forming performance.

 

Application of DX53D Galvanized steel sheet

 

Architecture: roof, garage, wall, pipe, and combined house.

Car: muffler, exhaust pipe, wiper accessories, fuel tank, truck boxes etc.

Home appliances: refrigerator, gas stove, air conditioning, electronic microwave oven, LCD frame, CRT explosion-proof belt, LED backlight source, electrical cabinet, etc.

Agriculture: pig, chicken house, barn, pipeline and other greenhouse

Other: thermal insulation cover, heat exchanger, dryer, water heater, etc.

 

  • Coating Table

Coating designation Minimum total coating mass, both surfaces* (g/m²) Guidance value for coating thickness per surface (typical μm)
Z100 100 7
Z140 140 10
Z180 180 13
Z200 200 14
Z225 225 16
Z275 275 20
Z350 350 25
Z450 450 32
Z600 600 42
ZA095 95 7
ZA130 130 10
ZA155 155 11
ZA185 185 14
ZA200 200 15
ZA255 255 20
ZA300 300 23
ZF080 80 6
ZF100 100 7
ZF120 120 8
ZF140 140 10

 

*In triple spot test.

In addition to these coating thicknesses defined according to EN10346, the offering contains different asymmetric coatings, coatings with equal coating minimum mass per surface, and other OEM specifications that are available upon request.

 

GNEE STEEL supplies DX53D galvanized steel with consistent quality, customized specifications and reliable global delivery. Our customers trust our technical expertise and stable supply system to support their long-term production needs.

 

📩 Send your inquiry to GNEE STEEL today and receive your competitive quotation.

 

Contact now

DX53D galvanized steel

 

SEND INQUIRY

SEND INQUIRY