galvanized steel sheet
DX53D galvanized steel sheet is a steel plate with a layer of zinc on the surface, which is designed to prevent corrosion on the surface of the steel plate and extend its service life. This kind of galvanized sheet has a good appearance and must not have defects that are harmful to the use of the product, such as no plating, holes, cracks and scum, excessive plating thickness, scratches, chromic acid dirt, white rust, etc.
The chemical properties of DX53D galvanized steel sheet are mainly reflected in its resistance to corrosion, which is attributed to the metallic zinc layer on its surface. In terms of physical properties, this steel plate has good coating density and weldability. In addition, when the steel plate thickness is less than or equal to 0.35mm, its minimum elongation is reduced by 7% from the value in the table

DX53D Steel Characteristic
GNEE STEEL DX53D steel is popular in many industries for its excellent formability, strength and weldability, especially for complex processing needs.
Excellent Formability
DX53D steel's high elongation (30-40%) makes it excellent in deep drawing and complex forming, avoiding cracking, and suitable for the manufacture of complex components. Compared with similar steels, our DX53D can better cope with the challenges of fine forming and complex design.
Enhanced Strength and Flexibility
DX53D's tensile strength (270-370 MPa) and yield strength (140-260 MPa) provide an ideal balance of strength and toughness, and can remain stable under high pressure. Compared with other brands, our products show higher stability and durability in complex forming and thick materials.
Excellent Weldability
The low carbon content (≤ 0.12%) makes DX53D steel extremely weldable, suitable for spot welding, arc welding and seam welding. Compared with other brands of steel, our DX53D maintains higher strength and reliability after welding, which is particularly suitable for complex assembly needs.
Environmentally Friendly Composition
The low carbon and low nitrogen composition of DX53D not only improves weldability, but also reduces carbon emissions during the production process. Compared with other brands of galvanized steel, our products are more environmentally friendly in terms of reducing waste and improving production efficiency.
Chemical composition of DX53D steel
DX53D chemical element content (%)
| C | Si | Mn | P | S | Ti |
| max 0.12 | max 0.5 | max 0.6 | max 0.1 | max 0.045 | max 0.3 |
Mechanical properties of steel DX53D
| Rm - Tensile strength (MPa) | 270-380 |
| Re - Upper yield strength or | 140-260 |
| Rp0.2 - 0.2% proof strength (MPa) | |
| A - Min. elongation Lo = 80 mm (%) | 30 |
Other galvanized steel grades:
|
Standard |
Grade |
C |
Si |
Mn |
P |
S |
Ti |
|
Forcold Forming Chinese Standard |
DX51D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
DX52D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX53D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX54D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX56D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX57D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
Forcold Forming Japanese Standard |
SGCC |
0.15 |
0.50 |
0.80 |
0.050 |
0.030 |
0.025 |
|
SGCD1 |
0.12 |
0.50 |
0.60 |
0.040 |
0.030 |
0.025 |
|
|
SGCD3 |
0.08 |
0.50 |
0.45 |
0.030 |
0.030 |
0.025 |
|
|
SGCD4 |
0.06 |
0.50 |
0.45 |
0.030 |
0.030 |
0.025 |
|
|
For Structure Japanese Standard |
SGC340 |
0.25 |
0.50 |
1.70 |
0.200 |
0.035 |
0.025 |
|
SGC400 |
0.25 |
0.50 |
1.70 |
0.200 |
0.035 |
0.150 |
|
|
SGC490 |
0.30 |
0.50 |
2.00 |
0.200 |
0.035 |
0.025 |
|
|
SGC510 |
0.30 |
0.50 |
2.50 |
0.200 |
0.035 |
0.025 |
|
|
For Structure AISI Standard |
S220GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
S250GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
|
S280GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
|
S320GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
|
S350GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.150 |
|
|
S550GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.150 |
-
Coating Table
| Coating designation | Minimum total coating mass, both surfaces* (g/m²) | Guidance value for coating thickness per surface (typical μm) |
|---|---|---|
| Z100 | 100 | 7 |
| Z140 | 140 | 10 |
| Z180 | 180 | 13 |
| Z200 | 200 | 14 |
| Z225 | 225 | 16 |
| Z275 | 275 | 20 |
| Z350 | 350 | 25 |
| Z450 | 450 | 32 |
| Z600 | 600 | 42 |
| ZA095 | 95 | 7 |
| ZA130 | 130 | 10 |
| ZA155 | 155 | 11 |
| ZA185 | 185 | 14 |
| ZA200 | 200 | 15 |
| ZA255 | 255 | 20 |
| ZA300 | 300 | 23 |
| ZF080 | 80 | 6 |
| ZF100 | 100 | 7 |
| ZF120 | 120 | 8 |
| ZF140 | 140 | 10 |
*In triple spot test.
In addition to these coating thicknesses defined according to EN10346, the offering contains different asymmetric coatings, coatings with equal coating minimum mass per surface, and other OEM specifications that are available upon request.


