hot-dip galvanized structural steels
In modern construction and industrial fabrication, hot-dip galvanized structural steels must meet increasingly demanding requirements for strength, durability, and corrosion resistance. Among the most commonly used grades are S250GD+Z and S350GD+Z, each serving distinct structural roles.
Although both grades share the same galvanizing process and corrosion protection mechanism, their mechanical performance and application focus differ significantly. This article provides a detailed engineering-oriented comparison to support informed material selection.
Yield Strength Impact
Yield strength directly influences load-bearing capacity and section design.
- S250GD+Z: Suitable for medium-load structural components
- S350GD+Z: Enables lighter structures with higher load capacity
Higher-strength steel often allows engineers to reduce thickness while maintaining safety factors, which can lower total steel consumption.
Table 1 – Structural Design Comparison
| Parameter | S250GD+Z | S350GD+Z |
|---|---|---|
| Yield Strength | ≥ 250 MPa | ≥ 350 MPa |
| Typical Thickness Usage | Medium | Thinner sections |
| Weight Optimization | Moderate | High |
| Fabrication Flexibility | Excellent | Moderate |
Formability and Processing Considerations
S250GD+Z offers superior formability, making it easier to bend, roll, and punch. S350GD+Z, while still processable, requires stricter control during forming due to its higher strength.
This distinction is critical in applications involving:
- Complex profiles
- Cold-forming operations
- Tight bending radii
Surface Treatment and Zinc Coating Performance
Both grades support identical surface treatment options, ensuring corrosion resistance consistency across different strength levels.
Table 2 – Zinc Coating and Surface Options
| Feature | S250GD+Z | S350GD+Z |
|---|---|---|
| Hot-dip galvanized | Yes | Yes |
| Z100–Z220 coatings | Available | Available |
| Regular spangle | Yes | Yes |
| Minimized spangle | Yes | Yes |
| Zero spangle | Yes | Yes |
| Passivation / AFP | Optional | Optional |
The zinc coating provides sacrificial protection, ensuring long-term durability even when the surface is mechanically damaged.
Typical Industry Applications
-
S250GD+Z is commonly used in:
Light steel structures
Warehouses and sheds
Agricultural buildings
Secondary framing systems
-
S350GD+Z is commonly used in:
High-load steel frames
Solar and energy support systems
Industrial platforms
Infrastructure components
-
Cost and Lifecycle Efficiency
While S350GD+Z has a higher unit cost due to increased strength, it can reduce total project cost by:
Lowering material weight
Reducing section size
Improving structural efficiency
S250GD+Z remains the preferred choice for cost-sensitive projects where extreme load capacity is not required.
Dimensional Supply Range
Table 3 – Typical Sizes
| Grade | Thickness (mm) | Width (mm) | Delivery Form |
|---|---|---|---|
| S250GD+Z | 0.45–1.50 | 800–1500 | Coil / Sheet |
| S350GD+Z | 0.50–1.50 | 900–1500 | Coil / Sheet |
Both S250GD+Z and S350GD+Z are reliable hot-dip galvanized structural steels, each optimized for different performance priorities. Selecting the right grade requires a clear understanding of load demands, fabrication methods, and environmental exposure.
GNEE STEEL provides professional technical support, stable quality supply, and customized specifications for both grades.
📩 Contact GNEE STEEL today to discuss your project needs and receive a competitive quotation.
|
Standard |
Grade |
C |
Si |
Mn |
P |
S |
Ti |
|
Forcold Forming Chinese Standard |
DX51D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
DX52D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX53D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX54D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX56D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX57D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
Forcold Forming Japanese Standard |
SGCC |
0.15 |
0.50 |
0.80 |
0.050 |
0.030 |
0.025 |
|
SGCD1 |
0.12 |
0.50 |
0.60 |
0.040 |
0.030 |
0.025 |
|
|
SGCD3 |
0.08 |
0.50 |
0.45 |
0.030 |
0.030 |
0.025 |
|
|
SGCD4 |
0.06 |
0.50 |
0.45 |
0.030 |
0.030 |
0.025 |
|
|
For Structure Japanese Standard |
SGC340 |
0.25 |
0.50 |
1.70 |
0.200 |
0.035 |
0.025 |
|
SGC400 |
0.25 |
0.50 |
1.70 |
0.200 |
0.035 |
0.150 |
|
|
SGC490 |
0.30 |
0.50 |
2.00 |
0.200 |
0.035 |
0.025 |
|
|
SGC510 |
0.30 |
0.50 |
2.50 |
0.200 |
0.035 |
0.025 |
|
|
For Structure AISI Standard |
S220GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
S250GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
|
S280GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
|
S320GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
|
S350GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.150 |
|
|
S550GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.150 |



