Home-Knowledge-

Content

Comparing DC07 and DC06 cold-rolled steel:Higher Ultra-Deep-Drawing

Dec 05, 2025

cold-rolled steel

 

DC06 is already considered an ultra-deep-drawing steel used extensively in automotive interior components and complex industrial stampings. However, DC07 represents the highest formability level in the EN 10130 series, making it the preferred choice for the most challenging forming operations.

 

DC07 | 1.0898: Properties according to DIN EN 10 130

Steel type

Short designation VDA239-100* Material number
DC07 - 1.0898

* Comparative grade, therefore minor deviations from DIN EN values possible

DC07 | 1.0898: Mechanical properties (transverse)

Yield strength1) Re MPa max. Tensile strength Rm MPa Elongation at fracture2) % min. A80 Anisotropy r903)4) min. Strain hardening exponent n903) min.
150 250-310 44 2.5 0.230

DC07 | 1.0898: Chemical composition (heat analysis)

Percentage by weight % max.        
C P S Mn Ti
0.1 0.020 0.020 0.20 0.2

 

DC06 vs DC07: Understanding the Final Step Up

DC06 provides excellent ductility and very low yield strength. However, DC07 pushes these parameters further, allowing components to undergo extreme deformation without defects.

Property DC06 DC07
Standard EN 10130 EN 10130
Grade Level Ultra-deep-drawing Superior ultra-deep-drawing
Yield Strength Very low Lowest of all DC grades
Elongation Very high Highest level
Formability ★★★★★ ★★★★★★
Application Air-conditioning panels, automotive brackets Highly complex, multi-stage components

 

Key Reasons DC07 Surpasses DC06

  • Ideal for Extreme Geometries

When DC06 reaches its forming limit, DC07 continues to maintain stability.

  • Better Quality in Multi-Stage Operations

DC07 reduces cracking during redrawing or ironing processes.

  • Supports Higher Production Efficiency

Its consistent mechanical behavior helps reduce die wear and material failure.

👉 Why Choose GNEE STEEL?

Full grades available: DC01 / DC03 / DC04 / DC05 / DC06 / DC07

Sheet, coil, strip, slit edge, custom thickness & width

Mill-test certificates (EN 10204 3.1)

Professional packing for export

Fast delivery and stable supply

Technical support for forming and deep drawing projects

📩 Get a Fast Quote Today

Whether you need ultra-deep-drawing DC07, high-formability DC06, or cost-effective DC01, our team can recommend the best grade based on your drawing depth, product geometry, and production process.

DC01 / DC03 / DC04 / DC05 / DC06 / DC07

SEND INQUIRY

SEND INQUIRY