Hot DIP Galvanized Steel Coil

Hot dip galvanizing is to pickle the steel parts first.In order to remove the iron oxide on the surface of the steel parts, after pickling, they are cleaned in an aqueous solution of ammonium chloride or zinc chloride or a mixed aqueous solution of ammonium chloride and zinc chloride, and then sent into the hot dip plating tank.The so called hot dip plating is a method of immersing a base metal in another low melting point metal in a molten state to form a metal protective film on its surface.
SGCC GI steel coil and SGCC GI steel sheet are synonymous with durability, strength and versatility. Combining the superior properties of galvanization with the ability to create thin, lightweight materials, galvanized steel has become the preferred choice across a variety of industries.
Hot-dip galvanizing reacts molten metal with an iron matrix to produce an alloy layer, thereby combining the matrix and the coating.The identification of Japanese steel plate grades: SGCC, HOT-DIP GALVANIZED STEEL is Hot Dipped Galvanized Steel Coils or Hot Dipped Galvanized Steel Sheets.
Galvanizing is an economical and effective antirust method which is often used.
Also known as hot dip galvanized steel coil SGCC (galvanized iron), this type of steel is made by dipping coils of cold-rolled or hot-rolled steel into a bath of molten zinc, creating a protective layer that prevents corrosion and extends the life of the material.
SGCC (Steel Grade Coating Composition) is often used as a quality benchmark for evaluating the efficiency of hot dip galvanized steel coils and sheets.
- Product Specifications
| Product | Galvanized Steel Coils/Sheets-GI |
| Material | DX51D,DX52D,DX53D,DX54D,SGCC,S250GD-S550GD |
| Width | 30-1500 mm |
| Thickness | 0.1-6.0 mm |
| Type of Coating | Hot-Dipped Galvanized |
| Zinc Coating | Z30-Z600(g/m²) |
| Surface Treatment | Chromed/Skin Pass/Oiled/Slightly Oiled/Dry |
| Spangle | Zero Spangle/ Regular Spangle |
| Coil Weight | 3-10 tons per coil or as requirements |
| Grade | Yield Strength/Mpa | Tensile Strength/Mpa | Elongation/% |
| DX51D+Z | ≤360 | ≤440 | ≥20 |
| Dx52D+Z | ≤260 | 330-390 | ≥28 |
| DX53D+Z | ≤200 | 270-320 | ≥38 |
| DX54D+Z | ≤180 | 270-310 | ≥40 |
| S250GD+Z | ≥250 | ≥330 | ≥19 |
| S350GD+Z | ≥350 | ≥420 | ≥16 |
| S450GD+Z | ≥450 | ≥510 | ≥14 |
| S550GD+Z | ≥550 | ≥560 | / |


