Home-Knowledge-

Content

Are all high-strength automotive steels the same thing?

Feb 26, 2024

The core of modern automobile manufacturing is safety and environmental protection, and the requirements for the body are to "increase strength and reduce weight." Advanced high-strength steel is booming under this background and is widely used in structural parts and safety parts of automobile body-in-white.

 

GNEE high-strength steel series (yield strength up to 1400MPa) provides you with a solution picture

High strength steel types for automobiles
1. Duplex steel

(DP steel, Dual Phase Steels)

2. Complex phase steel

(CP Steel, Complex Phase Steels)

3. Phase change induced plastic steel

(TRIP steel, Transformation InducedPlasticity Steels)

4. Martensitic steel

(MS Steel, Martensitic Steels)

5. Quenched ductile steel

(QP Steel,Quenching and PartitioningSteels)

6. Twin-induced plastic steel

(TWIP Steel, Twinning InducedPlasticity Steels)

7. Boron steel

(PH steel or B steel, PressHardening/Boron Steels)

 

Dual phase steel (DP steel)
Performance features:
No yield elongation, no room temperature aging, low yield ratio, high work hardening index and high bake hardening value.

typical application:
DP series high-strength steel is currently the preferred steel type for structural parts and is widely used in structural parts, reinforcements and anti-collision parts.
For example, car bottom cross members, rails, anti-collision bars, anti-collision bar reinforced structural parts, etc.


Complex phase steel (CP steel)
Performance features:
The grains are small and the tensile strength is high. Compared with dual-phase steels with the same level of tensile strength, its yield strength is significantly higher. It has good bending performance, high hole expansion performance, high energy absorption capacity and excellent flanging forming performance.

typical application:
Chassis suspension parts, B-pillars, bumpers, seat rails, etc.


Phase transformation induced plasticity steel (TRIP steel)
Performance features:
The structure contains retained austenite and has good formability. During the forming process, the retained austenite will gradually transform into hard martensite, which is beneficial to uniform deformation.

TRIP steel also has the characteristics of high collision absorption energy, high strength plastic product and high n value.

typical application:
Parts with relatively complex structures, such as B-pillar reinforcement plates, front longitudinal beams, etc.

Quenched Ductile Steel

 

Quenched Ductile Steel (QP Steel)
Performance features:
Using martensite as the matrix phase and utilizing the TRIP effect of retained austenite during the deformation process, it can achieve higher work hardening ability, so it has higher plasticity and formability than the same level of ultra-high-strength steel.

 

Typical application:
It is suitable for automobile safety parts and structural parts with relatively complex shapes, such as A and B pillar reinforcements, etc.

Twin induced plasticity steel (TWIP steel)
Performance features:
TWIP steel is a fully austenitic steel with high C, high Mn and high Al components. Extremely high work hardening capabilities can be achieved through twin-induced dynamic refinement. TWIP steel has ultra-high strength and ultra-high plasticity, with a strong-plastic volume of more than 50GPa%.

ultra-high strength

Typical application:
TWIP steel has very superior formability and ultra-high strength, and is suitable for parts that require high material drawing and bulging properties, such as complex-shaped automotive safety parts and structural parts.


Steel (PH steel or B steel)
Performance features:
Ultra-high strength (tensile strength of more than 1500MPa), effectively improves collision performance and makes the car body lighter; parts have complex shapes and good formability; high dimensional accuracy.
typical application:
Safety structural parts, such as front and rear bumpers, A-pillars, B-pillars, center tunnels, etc.

SEND INQUIRY

SEND INQUIRY