Home-Knowledge-

Content

19-W-4 vs 19-W-2 Steel Grating: Differences in Bearing Bars, Load Capacity and Applications

Sep 07, 2026

19-W-4 and 19-W-2 are the two most frequently compared welded steel grating patterns, and they are regularly specified against each other for platforms, trench covers and trafficked floors. The two designations look almost identical – and in the bearing direction they behave very similarly – but the difference in cross bar spacing changes how each panel handles transverse loads, small wheels, weight and cost.

 

This guide compares the two patterns side by side so buyers can select the right one for the actual application.

Quick Answer: What Is the Difference?

 

Both patterns use the same 1-3/16 in (19/16 in) bearing bar spacing and welded construction. The only difference in the designation is the cross bar spacing:

 

19-W-4 – cross bars at 4 in (approx. 100 mm) centers. The industry-standard, most economical configuration.

19-W-2 – cross bars at 2 in (approx. 50 mm) centers. A tighter mesh with twice as many cross bars.

 

Because the bearing bar spacing is identical, the primary load capacity in the bearing direction is essentially the same for panels with the same bearing bar size. The difference lies in how each panel performs under transverse and local loads – and in weight, open area and price.

 

Side-by-Side Comparison

 

Feature

19-W-4

19-W-2

Bearing bar spacing

1-3/16 in (19/16 in) c/c

1-3/16 in (19/16 in) c/c

Cross bar spacing

4 in c/c

2 in c/c

Cross bars per foot of length

3

6

Mesh opening

Larger rectangular openings

Tighter openings

Open area

Slightly higher

Slightly lower

Panel weight (1-1/4 x 3/16 in bars)

~8.9 psf

~9.6 psf

Panel weight (1 x 3/16 in bars)

~7.3 psf

~8.0 psf

Relative cost

Lower (standard product)

Higher (more cross bars, more welding)

Availability

Stock item with most mills

Often made to order, longer lead time

Approximate weights are shown for comparison; actual values depend on cross bar type and size.

 

Send Your Requirements

Bearing Bars: Identical Spacing, Same Size Options

 

Since both patterns share the 19/16 in bearing bar spacing, the bearing bar selection logic is identical:

1 x 1/8 in, 1 x 3/16 in – light to standard pedestrian duty

1-1/4 x 3/16 in, 1-1/2 x 3/16 in – standard platform and catwalk duty (most common)

2 in+ depths with 1/4 in – 1/2 in thicknesses – heavy-duty, vehicular and forklift traffic

In both patterns, the bearing bars are the primary load-carrying members and must span between the support beams. Choosing between 19-W-4 and 19-W-2 does not change how much load the panel carries in the bearing direction – that is set by the bearing bar size and the span.

 

Load Capacity: Where the Patterns Actually Differ

 

Bearing-Direction Loads (Uniform Loads)

For a given bearing bar size and span, 19-W-4 and 19-W-2 provide effectively the same allowable uniform load and concentrated load along the bearing bars. If a project only involves distributed loads carried by the bearing bars, the 4 in cross bar spacing is normally sufficient – and cheaper.

Transverse and Rolling Loads

The 2 in cross bar spacing of 19-W-2 becomes valuable when loads act across, between, or directly on the cross bars:

Small wheels – hand trucks, pallet jacks and small casters can catch or drop into the 4 in openings of 19-W-4; the 2 in mesh bridges them

Local point loads between bearing bars – the closer cross bars help distribute local impacts

Long narrow objects falling through – tighter mesh reduces the size of objects that can pass through the floor, relevant above equipment and process areas

Impact and Panel Rigidity

Twice the cross bars means twice the welded intersections per panel. This produces a stiffer panel with better resistance to twisting and side impacts – one reason 19-W-2 appears in heavy-duty and vehicular specifications despite its higher cost.

 

Applications: Which Pattern Fits Where

 

Application

Recommended Pattern

Reason

Pedestrian platforms and walkways

19-W-4

Most economical, ample open area

Standard trench and drainage covers

19-W-4

Drainage performance, lower cost

Catwalks and mezzanines

19-W-4

Uniform pedestrian loads

Pallet jack / hand truck routes

19-W-2

Small wheels need tighter mesh

Areas above sensitive equipment

19-W-2

Smaller dropped-object openings

Heavy-duty vehicular areas (either)

19-W-4 or 19-W-2

Selected by bearing bar size and wheel load; W-2 adds transverse stiffness

Floors requiring maximum drainage/ventilation

19-W-4

Slightly higher open area

 

Send Your Requirements

Cost and Availability Considerations

 

19-W-4 is the default industry product: stocked in a wide range of bearing bar sizes and finishes, with the shortest lead time and lowest price per square foot. 19-W-2 requires roughly double the cross bar material and welding, which increases both weight and cost, and it is frequently a made-to-order item. If the application does not specifically need the tighter mesh, 19-W-4 with an appropriately sized bearing bar is usually the more economical specification.

 

Summary

 

19-W-4 and 19-W-2 share the same 1-3/16 in bearing bar spacing – bearing-direction load capacity is a function of bearing bar size and span, not the cross bar spacing

19-W-2's 2 in cross bars create a tighter, stiffer mesh better suited to small wheels, local impacts and dropped-object concerns

19-W-4 is lighter, cheaper and more readily available – the right choice for most platforms, walkways and drainage covers

Either pattern can serve heavy-duty traffic when heavier bearing bars are selected and the configuration is verified against the actual loads

 

GNEE STEEL supplies both 19-W-4 and 19-W-2 welded steel grating in all standard and heavy-duty bearing bar sizes, with hot-dip galvanizing, serrated surfaces and custom fabrication.

 

SEND INQUIRY

SEND INQUIRY