Home-News-

Content

Hot-dip Galvanized High-strength Low-alloy Steel Series

Jul 10, 2025

Hot-dip Galvanized High-strength Low-alloy Steel Series ‌main Grades:‌

H260LAD+Z, H300LAD+Z, H340LAD+Z, H380LAD+Z, H420LAD+Z.


‌Product Characteristics:‌ Small amounts of alloying elements such as Nb, Ti, and V are added to low-carbon steel. These elements combine with carbon, nitrogen, etc., to form carbides and nitrides that precipitate in the ferrite matrix, thereby enhancing the strength of the steel. Higher strength grades are achieved through precipitation strengthening and grain refinement strengthening while reducing the content of alloying elements. 


‌Performance Characteristics:‌ Exhibits good formability and high strength, with the product possessing certain aging properties. 


‌Primary Applications:‌ Used for structural components in automobiles, such as seats and cross beams.

 

Material GB JIS DIN EN ASTI
hot-dip galvanized Coil Plate General use
Used for standard applications without special forming requirements
DX51D+Z 120160 180 200 275 SGCC St01Z
St02Z
DX51D+Z CSA
CSB
CSC
Stamping Grade
Specifically formulated for stamping/pressing operations
DX53D+Z SGCD1+ St04Z
St05Z
DX53D+Z FS A
FS B

Deep drawing grade

Specifically formulated for severe forming/deep drawing operations requiring high ductility

DX54D+Z SGCD2
SGCD3
  DX54D+Z DDS A
DDS B

Structural grade

Used for load-bearing structural components, prioritizing strength

S250GD+Z SGC340 StE250Z S250GD+Z SS37(255)
SS40(275)
SS50(340)
SS80(550)
S280GD+Z SGC400 StE280Z S280GD+Z
S320GD+Z SGC440 StE320Z S320GD+Z
S350GD+Z SGC490 StE350Z S350GD+Z
S550GD+Z SGC570    
      SGH340+Z      
      SGH440+Z      

Mechanical properties of hot-dip galvanized stamping steel products

Hot-dip Galvanized High-strength Low-alloy Steel Series

‌‌
‌Application fields of hot-dip galvanized stamping steel‌
Primarily for automotive safety structural components, including door impact beams, A/B pillars, and chassis reinforcements, with galvanized coating providing ≥80g/m² corrosion resistance.

‌‌
‌A-pillar lower reinforcement plate‌
A stamped part used to enhance collision energy absorption in vehicle body frames, typically made from 1500–1800MPa boron steel.

‌

A-pillar lower reinforcement plate


‌Left and right reinforcement plates‌
Symmetrical components for reinforcing side-impact zones (e.g., door sills or seat crossmembers), fabricated via cold/hot stamping processes.

‌Left and right reinforcement plates

‌GNEE STEEL‌ specializes in high manganese steel, wear-resistant steel, high-strength steel, automotive steel, medium-high carbon steel, cold rolled, pickling, galvanized, silicon steel, and other steel varieties. As a modern enterprise, it integrates raw material supply, processing, and logistics distribution.

SEND INQUIRY

SEND INQUIRY