Classification of oil-immersed transformers
1. According to the structure, it can be divided into iron core transformer and iron shell transformer. If the winding is wrapped around the iron core, it is an iron core transformer; if the iron core is wrapped around the winding, it is an iron shell type transformer. They are only slightly different in structure, but not essentially different in principle. The power transformer is iron core type.
2. According to the number of phases, it can be divided into three-phase transformer and single-phase transformer.
In three-phase power systems, three-phase transformers are generally used. When the capacity is too large and limited by transportation conditions, three single-phase transformers can also be used to form a transformer group in the three-phase power system.
3. According to the winding, it is divided into two-winding transformer and three-winding transformer.
Common transformers are double-winding transformers, that is, there are two windings on the core, one is the primary winding and the other is the secondary winding. The three-winding transformer is a large-capacity (above 5600kva) transformer used to connect three transmission lines with different voltages. In special cases, Satons transformers with larger windings are also available.

Working principle of oil-immersed transformer
The components of an oil-immersed transformer include the transformer body, oil-immersed transformer oil, oil tank and cooling device, voltage regulating device, protection device, and outlet sleeve.
Oil-immersed transformers are important equipment in power systems that are mainly used to change voltage and transmit electrical energy. It is the basis for the safe and economical operation of the power grid. The working principle of oil-immersed transformer is mainly the principle of electromagnetic induction. On the closed iron core, there are two mutually insulated windings. The side connected to the power supply is called the primary winding, and the side that outputs electric energy is called the secondary winding.
When AC power voltage is applied to the primary winding, AC current passes through the winding and generates alternating magnetic flux in the core. The alternating magnetic flux not only passes through the primary winding, but also passes through the secondary winding, generating induced potentials E1 and E2 in the two windings respectively. At this time, if the secondary winding is connected to the load of the external circuit, current will flow into the load, that is, the secondary winding will output electrical energy.


