What is S250GD | 1.0242?
S250GD (1.0242) is a structural steel grade under EN 10346, mainly used for galvanized steel. "S" denotes structural steel, "250" indicates the minimum yield strength in MPa, and "GD" signifies its suitability for galvanization. It contains carbon, manganese, and silicon, with stringent limits on sulfur and phosphorus. Common methods include hot-dip and electro-galvanizing, producing galvanized sheets or coils for construction, appliances, and automotive industries.

S250GD Steel Equivalent Grade
| Standard | Equivalent Grade |
| BS | FeE250G |
| ASTM | Grade B (ASTM A 466 M) |
| GB | Q235 |
| JIS | SGC340 |
S250GD | 1.0242 Chemical Composition
| Element | Maximum Content (%) |
| Carbon (C) | 0.2 |
| Manganese (Mn) | 1.7 |
| Silicon (Si) | 0.5 |
| Phosphorus (P) | 0.1 |
| Sulfur (S) | 0.045 |
| Nitrogen (N) | 0.012 |
| Aluminum (Al) | 0.015 |
S250GD Steel Mechanical Properties
| Steel Grade | Yield Strength MPa ≥ | Tensile Strength MPa ≥ | After Breakage Percent Elongation % ≥ | Coating Adhesion | |
| Nominal Thickness mm ≤ 0.7 | Nominal Thickness mm > 0.7 | Bending Center Diameter (a = plate thickness) | |||
| S250GD+Z, S250GD+ZF, S250GD+ZA, S250GD+ZM, S250GD+AZ, S250GD+AS | 250 | 330 | 17 | 19 | 1a |
Advantages of Choosing S250GD+Z
Longevity: Hot-dip galvanization ensures sacrificial corrosion protection that extends service life.
Versatility: Suitable across sectors from building construction to logistics and agricultural infrastructure.
Formability: Excellent bendability and drawability allow efficient fabrication and assembly.
Consistency: Reliable mechanical performance ensures compliance with design specifications.
Applications
S250GD is used in almost all construction applications where both load-bearing capacity and corrosion protection are required. Typical fields of application are
- Roof and façade systems: trapezoidal and standing seam profiles for residential, commercial and industrial buildings.
- Drainage components: Gutters, downpipes and rainwater collectors.
- Load-bearing structures: Lightweight halls, carports and canopies.
- Container and hall construction: profiled sheets for wall and ceiling elements.
- Solar mounting systems: Frames and substructures with a long service life and low maintenance.
The ability to match the coating precisely to the ambient conditions means that maintenance cycles can be extended and overall life cycle costs reduced.
- Available Steel Grade
| Steel grade | Coating | Yield(MPA) | Tensile(MPA) | Elongation(%) |
| DX51D | Z,ZF | -- | 270-500 | 20 |
| DX52D | Z,ZF | 140-300 | 270-420 | 22 |
| DX53D | Z,ZF | 140-260 | 270-380 | 26 |
| DX54D | Z,ZF | 140-220 | 270-350 | 30 |
| S220GD | Z,ZF | 220 | 300 | 18 |
| S250GD | Z,ZF | 250 | 330 | 17 |
| S280GD | Z,ZF | 280 | 360 | 16 |
| S320GD | Z,ZF | 320 | 390 | 15 |
| S350GD | Z,ZF | 350 | 420 | 14 |
| S400GD | Z,ZF | 400 | 470 | -- |
| S450GD | Z,ZF | 450 | 530 | -- |
| S500GD | Z,ZF | 500 | 560 | -- |



